User Guide

5-1
5
▼ ▼ ▼ ▼
IBM OS/2 Installation
This chapter explains how to install the Adaptec 7800 Family
Manager Set Driver for OS/2. The
aic7870.add
driver supports
Ultra SCSI devices for OS/2 v.2.1x, and OS/2 Warp3.x, 4.x, and 4.x
SMP. The
aic78u2.add
driver supports Ultra2 SCSI devices for OS/2
Warp 3.x, 4.x, and 4.x SMP. Refer to the list of devices on page 1-3.
If you are installing OS/2 for the first time, see
Installing the Driver
When Installing OS/2
on page 5-1. If OS/2 is already installed in your
system, see
Installing the Driver When OS/2 is Already Installed
on
page 5-6.
Installing the Driver When Installing OS/2
To install the
aic7870.add
or
aic78u2.add
driver at the same time
you install OS/2, follow the instructions below for the version of
OS/2 you are installing.
Note:
When installing OS/2 from a CD-ROM, be sure the
CD-ROM SCSI ID is not set to 0 or 7.