User Guide

4-16
Adaptec 7800 Family Manager
Using a CD-ROM with NetWare
To use a CD-ROM with NetWare v3.1x, v4.0, or v4.1x, follow these
instructions:
1
Load aic7870.dsk or aic78u2.ham by entering the following
line:
:load [
pathname ]aic7870
or
:load [
pathname ]aic78u2
2
If using an Ultra SCSI host adapter, load aspicd.dsk by
entering the following line:
:load [
pathname ]aspicd
For multiple LUN CDs, enable multiple LUN scanning with
the lun_enable switch (e.g., load aspicd lun_enable=FF). The
lun_enable switch is not needed for
aic7870.dsk or
aic78u2.ham
.
3
Load cdrom.nlm by entering the following line:
:load [
pathname ]cdrom.nlm
Note:
For NetWare 4.01 and 4.02 only: You have to load
nwpa.nlm before you can load cdrom.nlm .
4
Enter the following line at the prompt and then note the
number and name of the CD:
:cd device list
5
Enter the number or volume name of the CD at the command
line:
:cd mount
[x] [name]