User Guide

4-5
Novell NetWare Installation
Loading the Driver at Server Bootup
To automatically load the aic7870.dsk or aic78u2.ham at server
bootup, the
startup.ncf file (usually located in your server’s startup
directory) must contain a load command line that specifies the
location of the driver and any appropriate command line options
(see Using the Load Command Line Options on page 4-7). For
additional information on the
startup.ncf file, refer to your NetWare
documentation.
Note:
To load the driver from your hard disk, the driver and
aspitran.dsk module must be copied from the 7800 Family
Manager Set diskette for NetWare to a directory on your
hard disk [usually the server’s startup directory (e.g.,
c:\nwserver )].
The correct syntax to load the driver is
load [
pathname ]aic7870 [ options ]
or
load [
pathname ]aic78u2 [ options ]
For example, the command line to load the driver from the
c:\nwserver directory, with the verbose= option on is
load c:\nwserver\aic7870 verbose=y
or
load c:\nwserver\aic78u2 verbose=y