User Guide

4-3
Novell NetWare Installation
NetWare v4.0 or v4.1x
Follow these instructions only if you are installing NetWare v4.0 or
v4.1x for the first time:
1
Begin installation of NetWare v4.0 or v4.1x on your server as
instructed in your NetWare documentation.
2
When a screen appears that asks you to select a disk driver,
press Insert.
3
Insert the Adaptec 7800 Family Manager Set diskette for
NetWare into your disk drive.
4
Press F3 and specify the path to the aic7870.dsk or
aic78u2.ham driver for NetWare (e.g., a:\netware\v4_xx on the
diskette).
5
Select AIC7870.DSK or AIC78U2.HAM and press Enter.
6
Press Alt-ESC. From the console prompt type the following:
load a:\netware\aic7870.dsk
or
load a:\netware\aic78u2.ham
7
Press Enter. A list of slot numbers separated by commas is
displayed. Write down all slot numbers listed. Do not press
Enter.
8
Press ESC twice.
9
At the prompt, press Alt-ESC.
10
Choose Select/Modify Driver Parameters then press Enter.
11
Type the slot number and press Enter.
12
Press F10, or ESC.
13
Choose Save Parameters and Continue, and press Enter.
14
To install additional adapters, follow the procedures from step
10.
15
When complete, select Continue the Installation to complete the
installation.