User Guide

2-19
Microsoft Windows NT Installation
[xxxxx081]
[xxxxxx8A]
[xxxxxx83]
Adapter initialization failure. An error has occurred while the driver
was setting up its internal data structures. Verify that your adapter is
supported by this version of the driver.
[xxxxx089]
Unable to allocate memory. This indicates that there may be a
problem with the amount of memory installed in your system.
Verify that your system has at least the minimum amount of
memory required by your operating system.
[xxxxx096]
Adapter hardware initialization failure—possible resource conflict.
The driver has attempted to initialize the adapter hardware but
failed. This might suggest that the adapter resources (e.g., IRQ)
conflict with another board installed in your system.
[xxxxx097]
Unable to allocate memory. This indicates that there may be a
problem with the amount of memory installed in your system.
Verify that your system has at least the minimum amount of
memory required by your operating system.
[xxxxx0af]
Unable to de-allocate memory that was allocated for a target device.
Normally, this is not a serious problem, unless you get this message
frequently over a short period of time. The memory can be
reclaimed by rebooting the system.
[xxxxx0ce]
Scatter Gather Limit exceeded. An I/O request packet from the
system contained a Scatter Gather element list that contained more
elements than are supported by the miniport. Scatter Gather is a list
of data segments that define the entire data transfer. Scatter Gather
is a means to improve total data throughput. This error might be
caused by a component external to the miniport driver, such as the
operating system or an ASPI application.