User Guide

7-9
SCO UnixWare Installation
Removing the Driver
If you no longer need the adsl20 / adsl or adsb20 / adsb driver, you
can use the following procedure to remove it completely:
1
Back up all important computer files.
2
At the UnixWare root prompt, type the following:
For SCO UnixWare 2.0x:
/etc/conf/bin/idinstall -d adsl20
or
/etc/conf/bin/idinstall -d adsb20
The following files will be deleted:
/etc/conf/mdevice.d/adsl20
/etc/conf/pack.d/adsl20/Driver.o
/etc/conf/pack.d/adsl20/space.c
/etc/conf/pack.d/adsl20/disk.cfg
/etc/conf/sdevice.d/adsl20
or
/etc/conf/mdevice.d/adsb20
/etc/conf/pack.d/adsb20/Driver.o
/etc/conf/pack.d/adsb20/space.c
/etc/conf/pack.d/adsb20/disk.cfg
/etc/conf/sdevice.d/adsb20
For SCO UnixWare 2.1:
/etc/conf/bin/idinstall -d adsl
or
/etc/conf/bin/idinstall -d adsb