User guide

1-4 Chapter 1: Product introduction
1.3.2 Bottom view
Mounting hook: Use the mounting
hook to install the device on
concrete or wooden surfaces
using a roundhead screw.
Air vents: These vents provide
ventilation to the device.
1.3.3 Rear view
Ethernet port: This port connects the supplied
RJ-45 plug and cable.
DC IN socket: This socket connects the power
adapter plug.
Reset button: Press this button for more than
ve seconds (in AP or Ethernet mode) to load
the default values. In Ethernet adapter mode,
press this button for less than ve seconds to
connect to the rst saved wireless connection
in the prole table. See page 3-15 for the reset
button function in Ethernet mode.
Mounting
hook
Air vents
Ethernet port
DC IN socket
Reset button