User's Manual
Table Of Contents
- 1 Getting to know your wireless router
- 2 Getting started
- 3 Configuring the General and Advanced Settings
- 4 Utilities
- 5 Troubleshooting
- Appendices
45
3.8.2 DHCP Server
Your wireless router uses DHCP to assign IP addresses
automatically on your network. You can specify the IP address
range and lease time for the clients on your network.
To configure the DHCP server:
1. From the navigation panel, go to Advanced Settings > LAN
> DHCP Server.
2. In the Enable the DHCP Server field, tick Yes .
3. In the 4G-AX56’s Domain Name text box, enter a domain
name for the wireless router.
4. In the IP Pool Starting Address field, key in the starting IP
address.
5. In the IP Pool Ending Address field, key in the ending IP
address.
6. In the Lease time field, specify in seconds when an assigned
IP address will expire. Once it reaches this time limit, the DHCP