Model RS-655 Owner’s Guide GRS655 2013-08
Congratulations Congratulations on the purchase of your state-of-the-art remote start and keyless entry system. Reading this Owner’s Guide prior to using your system will help maximize the use of your system and its many features. Please visit www.astrostart.com – for general and additional guide information. For any additional questions please contact your authorized Directed dealer or contact Directed at 1-800-753-0600. (U.S.
Important information Government Regulations and Safety information Read the Government Regulations and Warning! Safety First sections of this manual prior to operating this system. Warning! Failure to heed this information can result in death, personal injury or property damage and may also result in the illegal use of the system beyond its intended purpose. Your Warranty Your Responder LCD system comes with a warranty.
Contents Getting Started.................................................................................................... 4 Charging the remote control:................................................................. 4 Keys to using this manual...................................................................... 5 Remote Control Information .................................................................................. 6 Status Screen Icons ..........................................................
System Type ...................................................................................... 25 Clock Set .......................................................................................... 25 Review ............................................................................................. 25 Exit .................................................................................................. 25 Pair Remote....................................................................................
Installation ........................................................................................ 49 Remote Start Capable ........................................................................ 49 Manual Transmission Vehicles ............................................................. 49 Interference ....................................................................................... 51 Upgrades and Batteries ......................................................................
Getting Started Your Responder LCD remote is powered by an internal rechargeable battery that can only be serviced by an authorized Directed dealer. Due to transit and storage time prior to your purchase, the battery charge may have depleted. To ensure proper operation, check the battery level and connect the battery charger if not fully charged. “Battery Information (Responder LCD)” on page 44 and “Status Screen Icons” on page 8 for more information about the battery. Charging the remote control: 1. 2.
Keys to using this manual At a Glance Specific actions (in bold type) and style conventions are used consistently throughout this manual, they are as follows: s s s s s Press: implies pushing in and releasing a button. Hold: is used after Press actions when a button needs to be held in position for an extended period of time, typically several seconds. LOCKED this style denotes the text which appears in the text field portion of the Display during operations described in the manual.
Remote Control Information Internal Antenna Display Command Buttons Function Button Mini-USB Port 6 Feature Description Internal Antenna Used for transmitting and receiving information Display Status screen - the upper portion of the display contains status icons for the System, Remote Start and Remote Control.
Control Center At a Glance Status LED Control button The Control Center, typically located on the upper part of the front windshield sends and receives commands or messages to and from your system. It consists of: s s s The In-vehicle system antenna, for 2 way communication. The Status LED, as a visual indicator of the system’s status. The Control button, for placing the system into Valet Mode* and to perform the Emergency Override** operation.
Status Screen Icons Status Screen Icons ALL 1 Text Field The table below describes all the status screen icons. Icon Description System Status Locked: The system is locked. Locked: The system is Locked in Valet. Unlocked: The system is Unlocked. Remote Start Unlocked: The system is Unlocked in Valet. 8 Remote start is active, the engine is running. Timer mode is On; Remote Start is On. Note: When the icon is without an arrow head: Timer mode is enabled: Remote Start is Off © 2013 Directed.
Icon Remote Start At a Glance + Description Smart Start is On; Remote Start is On. Note: When the icon is without an arrow head: Smart Start is On; Remote Start is Off.
Icon Description Bars indicate battery level is Full, ¾,½,¼ or Empty On while the remote control is transmitting a command On while the remote control is receiving a message Remote Control Status On with Out of Range fault tone to indicate the remote failed to receive a command confirmation Pager on: The remote will wake up to listen for messages Pager off: The remote will not wake up to listen for messages The remote will Vibrate when messages are received The remote will emit Beeps and Tones when messa
Using your System Commands and Confirmations Performing Commands Perform Basic commands by pressing one of the command buttons while in the Direct Access level. Direct access is available while the text field displays the Clock, Temperature or Runtime. Perform Advanced commands by pressing one of the command buttons after accessing one of the Function Levels. Function Levels are available when the text field displays LEVEL 1,2,3 or 4. Advanced command example: Silent Lock 1.
Responder LCD Command table Level Button DIRECT ACCESS X1 X2 X3 X4 LOCK SILENT LOCK UNLOCK SILENT UNLOCK REMOTE VALET CAR FINDER REMOTE START RUNTIME RESET TIMER MODE SMART START REAR DEFOGGER AUX/TRUNK RELEASE AUX 1 AUX 2 AUX 3 AUX 4 FUNCTION SHIFT CABIN TEMPERATURE REQUEST (2-WAY ONLY) RUNTIME CHECK (2-WAY ONLY) Fault Condition Alerts If, when performing a command, a condition exists that does not allow activation of a Remote Start feature the REMOTE START ERROR text and a fault t
Basic commands (Direct Access) Lock ALL 1 Press and release 6:30 If the door was open when locking, you are notified of an active zone immediately after locking the system. The horn in the vehicle “honks” again. The 2-way remote control sounds a short “error” tone, and the LCD displays the door icon. Note: the optional door input and horn honk must be connected for the system to give notification.
AUX/Trunk Press and hold The Trunk opens (if connected) when this button is pressed for 2 seconds. The TRUNK text and tones play to confirm. Remote Start Press and release Activates (or if On, deactivates) the remote starter. The engine and parking lights turn On and the REMOTE START ON text and tones play, or the engine and parking lights turn Off and the REMOTE START OFF text and tones play to confirm, the Remote Start status icons update.
Advanced commands: (Level 1) Press and release the button 1 time. Silent Lock Press and release ALL 1 level 1 Silent UnLock Press and release The doors unlock (if connected), and the parking lights flash twice. The SILENT UNLOCK text plays to confirm and the System Status icons update. AUX 1 Press and release Activates (or if On, deactivates) the Aux 1 output. The text and On tones or Off tones play to confirm. © 2013 Directed. All rights reserved.
Runtime Reset Press and release If more time is needed while remote start is active, runtime reset will reset the runtime counter to the pre-programmed setting. The RUNTIME text and tones play to confirm. The text field will update if set to display runtime. Note Remote Start must be On to use this feature. Temp Request Press and hold the button Requests the vehicle’s interior temperature and temporarily displays it via status screen icon and text field.
Advanced commands: (Level 2) Press and release the button 2 times. Remote Valet Press and release ALL 1 level 2 AUX 2 Press and release Activates (or if On, deactivates) the Aux 2 output. The text and On tones or Off tones play to confirm. AUX CHANNEL Timer Start* Press and release Activates (or if On, deactivates) Timer Start. The parking lights flash quickly four times for On and slowly four times for Off.
Runtime Remaining Press and hold the button Requests the remaining Remote start runtime and temporarily displays it in the text field. Note Remote Start must be On to use this feature. * See”Remote and System Operations” on page 35 for details. 18 © 2013 Directed. All rights reserved.
Advanced commands: (Level 3) Press and release the button 3 times. Car finder Press and release ALL 1 level 3 Smart Start* Press and release Activates (or if On, deactivates) Smart Start. The parking lights flash quickly five times for On and slowly five times for Off. The SMART START ON or SMART START OFF text and beeps play to confirm and the Remote start status icons update. Note System needs to be Locked or Smart Start will not start the engine.
Advanced commands: (Level 4) Press and release the ALL 1 button 4 times. AUX 4 level 4 Press and release Activates (or if On, deactivates) the Aux 4 output. The text and On tones or Off tones play to confirm. AUX CHANNEL Defogger* Press and release Activates the vehicle Defogger circuit (if connected) while Remote Start is activated. The DEFOG ON text and beeps play to confirm and the Remote Start status icons update.
Responder LCD configuration Operations of the Responder LCD and how it communicates messages are set in the configuration Main Menu. Navigating menus and options Navigating menus and features, changing options, and exiting are performed using the remote control buttons. The following instructions discuss how to access and configure the settings. Button operation s Access menu items 1. 2. 3. Press and hold the button for 8 seconds, the remote will beep once, MAIN MENU is displayed.
Main Menu The following Main Menu list of features is available for configuration of the remote control. Setup Remote menu: Keypad Lock Options: OFF , AUTO When OFF , the buttons do not lock and always perform a command when pressed. When set to AUTO , the remote buttons lock after a 20 second lapse between buttons presses to prevent unintentional operations. If a button is pressed when locked a fault tone plays as an alert followed by unlock instructions in the text field.
Off after 72 hours if the remote control is not used during this period. Just press any button to resume system monitoring. When set to ON it wakes up every few seconds to listen for pages from the system. When set to OFF it does not wake up to receive remote start or factory alarm trigger pages. Note: When OFF , responses are still received when a command is performed but alarm trigger pages will not be received.
Runtime Alert Options: ON , OFF The main unit will send a page to alert you when the runtime is about to expire. When set to ON , an alert is generated when the Remote Start Time-out message is received. When OFF , no alert output is emitted for the message. Car 2 Options: OFF , ON , HOME This remote can control two systems independently. When set to OFF , the Car2 select option is not available. When set to ON the remote can be set to control 2 systems.
Button Beep Options: ON , OFF When set to ON , the remote will emit a beep as confirmation of a button press. When set to OFF , beeps are not emitted for button presses. System Type Options: SEC , RKE Clock Set Options: HOUR , MIN Review Displays firmware version Exit Exits and returns to the main menu © 2013 Directed. All rights reserved.
Pair Remote Remote pairing is a process where the Responder LCD remote, and the in-vehicle system learn the other’s encrypted identification, securing communication between the two from intruders. Note: Remotes are pre-programmed from the factory. Prepare the vehicle system to be Paired with a new remote 1. Turn the key to the On position. 2. Within 5 seconds press and release 1 time the Control button on the Control Center. 3. Within 5 seconds, press and hold the Control button.
Demo mode: Demo Mode plays a pre-selected group of animations as a demonstration tool to show friends or family. Running Demo mode shortens the battery life over time if used excessively: s s s s Note: Loop Silent and Loop Sound are not available and will not appear in the Demo Mode menu unless the battery charger is connected. Power Off: When an extended period of non-operation is anticipated, turning the power off will preserve the battery charge. Press the button while POWER OFF is displayed.
System Features Factory Alarm Trigger Notification: This system has an optional input that can be connected to the horn circuit. If the vehicle has a factory alarm controlled by the lock/unlock keyless entry system, the remote reports when the factory alarm is triggered - the remote screen displays the alarm icon and “alarm door open” displays the text area. Status LED: The Control Center Status LED flashes as a visual indicator that your vehicle’s remote start system is locked.
Remote Start Features Pit Stop Mode To exit vehicle with engine running The system keeps the engine running during short trips into the house or convenience store. To perform Pit Stop: 1. 2. 3. 4. With the engine running, set the parking brake and release the foot brake. Press the button, the parking lights will turn on and the REMOTE START ON message will play on the remote control. Turn the key to off, and remove it from the ignition, the engine continues running for the programmed runtime.
Remote Start Safe-lock Remote start safe-lock makes sure the doors are locked while the engine is running and after, even if they are unlocked when remote start is activated. Door locks may require additional parts and labor. Disabling Remote Start Remote start can be disabled by moving the Toggle Switch to the Off position. If remote start is attempted while Off, the engine will not start.
Timer Mode operation Activation begins a countdown timer as set by the installer (default 3 hours). When the timer expires the engine starts and the REMOTE START ON message is sent to the remote control. When the Remote start runtime expires the engine shuts off, the REMOTE START OFF message is sent to the remote control and the countdown timer restarts. This will repeat as many times as set by the installer (default 6 starts). Timer Start is exited after the final start.
Temperature Reporting During Remote start the vehicle interior is checked regularly for temperature changes. If a change in temperature is detected this report will be sent to the remote for display. Each time the remote receives this report it will beep, update, and display the newest temperature information using the Temperature Gauge icon. Note Temperature report must be turned on by an authorized Directed dealer.
4. 5. 6. 7. Timer Mode, press the optional dash mounted activation button or send the Timer Mode command from the Advanced Start menu screen). The parking lights flash 5 times to confirm MTS mode enable and the remote start activates the ignition outputs. The REMOTE START ON text and beeps play to confirm. Turn Off and remove the key from the ignition switch, the engine remains running. Exit the vehicle, close all the doors and Lock the system.
Remote Start Error For user safety, the system must be properly configured or remote start will not activate. Refer to the table below for the screens and parking light flashes that will identify the configuration issue and resolution.
Remote and System Operations Passive Locking* Park and exit the vehicle, after the doors are closed the Passive Locking countdown begins. The led flashes quickly and upon reaching 20 seconds the horn honks once. At 30 seconds the system Locks itself. Anytime before the system Locks you can re-enter the vehicle to load or unload items and, after closing passive Locking resumes.
Valet Mode Valet mode can be entered and exited by performing the Remote Valet command or manually using the vehicle key and the control button. When entered, the optional Failsafe Starter Kill is defeated while the convenience features still operate normally. Lock and Unlock commands still lock and unlock the doors while the VALET text and beeps play to confirm. Use 1. 2. 3.
Out of Range Each time a command is performed the remote will expect a command confirmation from the system. If a command confirmation is not received the out-of-range icon ( ) and a fault tone will play as an alert. No Remote Output Occasionally when a command is performed the remote may not generate a command confirmation output or Out of Range output. This indicates that the system received the command but it was an incomplete command (e.g.
1-way Companion Remote Control LED Command Buttons Function Button Level Direct Access Button Lock x1 x2 x3 x4 LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4 Silent Lock (Panic) Unlock Silent Unlock Remote Valet Car Finder Remote Start Runtime Timer Start Smart Start Defogger AUX 2 AUX 3 AUX 4 Reset Aux/Trunk AUX 1 Not Used Used to access function levels for Advanced Commands ( with multiplier in top row implies button presses)
Using the 1 way companion remote The companion 1 way remote commands the system features as shown in the previous table, but without the message display of the Responder LCD remote. Horn honks and parking light flashes are used to indicate that a command has been received and activated as described in the “Basic commands (Direct Access)” on page 13 and in the “Advanced commands: (Level 1)” on page 15.
Programming To enter; hold the button for 8 seconds, the remote emits one long beep and turns the LED on, the programming main menu has been accessed. To save and exit, press and release the button to go back to the main menu, and repeat to exit. 1 short and 1 long beep is emitted for each step back, the LED turns off when programming is exited. Remote Features menu Press and release the button, 2 LED flashes and beeps indicate the remote features menu is accessed and can be set.
Battery Information (1-Way) The 1- way companion remote is powered by one 3V coin cell lithium battery (P/N CR-2032) that will last approximately one year under normal use. Low Battery Alerts When disarming the system using a remote with a low battery the siren emits one additional chirp as an alert even if confirmation chirps are programmed off. Battery Replacement Side View 1. Using a small flat-head screwdriver, insert into slot located on the side of the remote control and carefully pry open the unit. 2.
System Expansion Options Controlling two vehicles (Car Select) The Responder LCD and 1way companion remote can control systems in two different vehicles saving the need for multiple remote controls. This feature also allows for customized system configurations on each vehicle that has more than one driver. See Owner Recognition for details. Owner recognition The system can be configured to recognize the remote used when unlocking, and will change selected features to match the remote users preferences.
Auxiliary Channels The Auxiliary Channel outputs of this system can activate many of the convenience features found in today’s vehicles. Once a command is performed to activate a convenience feature the Responder LCD displays text that matches the feature. The system installer can clarify if any of the below listed features are compatible with your vehicle.
Battery Information (Responder LCD) The Responder LCD remote control is powered by an internal rechargeable battery that can be serviced only through an authorized Directed Electronics dealer. The information and precautions in this section can help maximize your battery’s life and usage in providing your Responder LCD remote control with many years of trouble free operation.
several beeps play on the Responder LCD remote to indicate the battery needs to be charged. Important To preserve power at critically low battery levels the Responder LCD turns the pager off and stops receiving messages from the system. It will continue to command the system until the battery can be charged. Battery Life The Responder LCD remote control has many features that make it one of the most unique remote controls on the market today, including superior long range communication with the system.
Glossary of Terms Document Terminology 46 Control Module The “brain” of your system. Usually hidden underneath the dash area of the vehicle. It houses the microprocessor which monitors your vehicle and controls all of the system’s functions. Responder LCD (2way Remote Control) A hand-held, remote control which operates the various functions of your system and receives messages and pages from the system.
Government Regulations This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
Control Center To satisfy FCC RF exposure compliance requirements, the device and its antenna must maintain a separation distance of 20 cm or more from the person’s body, except for the hand and wrists, to satisfy RF exposure compliance. This device complies with the Industry Canada Radio Standards Specification RSS 210.
Warning! Safety First Please read the safety warnings below before proceeding. Improper use of the product may be dangerous or illegal. Installation Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. If you have any questions, ask your retailer or contact Directed directly at 1-800-753-0600. Remote Start Capable When properly installed, this system can start the vehicle via a command signal from the remote control transmitter.
Before remote starting a manual transmission vehicle, be sure to: s Leave the vehicle in neutral and be sure no one is standing in front or behind the vehicle. s Only remote start on a flat surface s Have the parking brake fully engaged WARNING! It is the responsibility of the owner to ensure the parking/emergency brake properly functions. Failure to do so can result in personal injury or property damage.
OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OPERATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMMEDIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS.
Limited lifetime consumer warranty Directed Electronics.
OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE UNIT.
