Installation manual

21
DURATIONS: UTILITY 1 & 2 & PANIC
STAGE 1 - LEVEL 11 5 6 7 8 9
0.7 sec.
 
15 sec.
 
1 minute
 
Utility Duration 1
8 minutes
 
0.7 sec.
 
15 sec.
 
1 minute
 
Utility Duration 2
8 minutes
 
30 sec.

Default settings:
Utility 1 = 0.7 sec.
Utility 2 = 0.7 sec.
Panic duration = 30 sec.
Panic Duration
60 sec.

ENGINE RUNTIME
STAGE 1 - LEVEL 12 5 6 7 8 9
Enabled

RPM > 3000
Disabled

Disabled

Pulse before start
on all Unlock outputs
Enabled

Disabled

Pulse after start
on all Lock outputs
Enabled

2 / 4 minutes
 
4 / 8 minutes
 
8 / 16 minutes
 
Default settings:
RPM > 3000 = Enabled
Pulse before start on all Unlock
outputs = Disabled
Pulse after Start on all Lock
outputs = Disabled
Engine runtime
8 min. (Gas)
16 min. (Diesel).
Engine runtime
(Gas / Diesel)
18 / 36 minutes
 
SENTINEL MODE
STAGE 1 - LEVEL 13
5 6 7 8 9
Disabled

Pulse before on
Trunk command
Enabled

-5° C (23° F)
 
-15° C (5° F)
 
-20° C (-7° F)
 
Sentinel mode
Activation Temperature
-30° C (-22° F)
 
4 min./ 8 min.
 
8 min./ 16 min.
 
Default settings:
Pulse before on
Trunk command = Enabled
Temperature = -15° C (5° F)
Run time
= 8 min. (Gas),
= 16 min. (Diesel)
Sentinel mode Runtime
Gas / Diesel
18 min./ 36 min.
 