Install Instructions

4
Installing AstroShield/AstroArmour in
Post-Frame Buildings
GOES WHEREVER REGULAR MASS FIBER
AND BOARD INSULATION CAN...AND EVEN PLACES THEY CAN'T!
For the best finished look, space purlins or girts
on 2’ or 4’ centers. This will place the seams on
the purlins or girt edge which will be covered and
sealed by the outside of the building. In many
applications, this would replace the need for taping.
ENTRY DOOR INSULATION
Special Note: Be sure to check technical data for temperature ranges in any high temperature application.
Follow the same instructions as for pre-
engineering metal buildings using staples
to secure the
AstroShield & AstroArmour
to the wood girts or purlins prior to
installation of metal sheeting.
AstroShield
PIPEWRAP
Use 1” wide strips of AstroShield s ecured a round
pipe every 2 feet on center to create necessary
air space.
LOADING DOCK OR OVERHEAD DOORS
Special coated AstroShield is available for
these applications.
DUCT WRAP
Use AstroShield 3" wide strips wrapped around to
create 3/4" wide airspace prior to installing
AstroShield HVAC duct material. 3/4" foam spacers
are also an option. Space about 2 feet on center.