Installation Manual

7
Figure 5. Close-ups of middle (a) and side (b) aluminum clamps. The dimensions for the middle clamps are a ≥ 40 mm,
b ≥ 26 mm, c = 8 mm, d ≥ 28 mm, and Ø = 9 mm.
Figure 6. Permitted clamping locations with clamp. For exact dimensions for a given module series, see table 1 (below).
Table 1. Use in conjunction with gure 6 to determine permitted clamping locations for a given module series for clamping
with clamps.
Module Series Dimension A B C
CHSM5409M 1200*554*35 1200 50 250
CHSM5611M 1453*808*35 1453 200 150
CHSM5612M 1580*808*35 1580 200 200
CHSM6610PM/P 1652*994*35 1652 200 210
CHSM6606P 1020*994*45 1020 50 205
CHSM6609M/P 1494*994*45 1494 50 320
CHSM6610M/P 1652*994*45 1652 50 360
CHSM6611P 1798*994*50 1798 60 400
CHSM6612M/P 1956*994*50 1956 60 440
Variable clamping range
(b)
(a)