Warranty

exhibits no more than 0.7%/ year of the nominal peak
power at STC specied on the respective datasheet from
the 2nd year to 25th year.
Astronergy Warranted Power Output
*Base on the product type and contract terms
For the above such loss in power measured by Astronergy
facility or the 3rd party testing institute recognized from
both sides, it is determined by Astronergy (at its sole
and absolute discretion) to be due to defects in material
or workmanship, is eligible for claim under this Limited
Warranty for Crystalline PV Modules. Astronergy will
replace such loss in power by either providing additional
modules to the customer to make up for such loss in
power, or by repairing or replacing the defective modules
at the discretion of Astronergy.
The remedies set forth in this Clause 2 shall be the sole
and exclusive remedies provided under the “Limited Peak
Power Warranty – Limited Remedy”.
CAVEAT: Any power measurement mentioned herein shall
be subject to ±3% deviation of uncertainty due to the
dierent measurement equipment being utilized.
3. Warranty Exclusions and Limitations
A. In any event, all warranty claims must be filed in
accordance with the instructions outlined in Clause 4 of
2
this Limited Warranty for Crystalline PV Modules, within
the applicable warranty period.
B. The Limited Warranty for Crystalline PV Modules does
not apply to any modules which have been subjected to:
• Misuse, abuse, neglect or accident;
• Alteration, disassemble, reinstallation, and/or improper
installation or application;
• Non-observance of Astronergy’s installation and
maintenance instructions;
• Repair or modications by persons that have not been
previously authorized or approved by Astronergy;
• Failures caused by surrounding equipment of the
module;
• Use under unusual conditions or environments that
deviate from the product specications and installation
manual;
• Use for purposes unrelated to the generation of solar
power;
• Connection with any other manufacturer’s PV modules,
or Astronergy modules that are a different model or
have dierent power output specications;
• Defects occurring during transportation or storage after
the modules have been delivered to the customer;
• Naturally occurring scratches, stains, mechanical
wear, rust, degradation, discoloring, or other alteration
occurring after the shipment from Astronergy that
have no effect on the power generation performance
or mechanical strength of the module, but not limited
to the below visual alteration during the related
warranty period:
a. Non-signicant discoloration of laminate.
b. Non-signicant loss of glass transparency.
c. Non-signicant increase of surface roughness.
d. Non-signicant frame damage due to environmental
stress.
100.00%
95.00%
90.00%
85.00%
80.00%
75.00%
97.00%
80.20%
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Linear Performance Wanrranty
Standard Performance Wanrranty
5.88%
more