Warranty
1
LIMITED WARRANTY FOR CRYSTALLINE PV MODULES
Astronergy/Chint Solar provides limited warranty to purchasers (hereafter referred to as
the “customer”) of Astronergy Crystalline products. The terms of the limited warranty are as
follows:
Warranty for Crystalline PV Modules does not warrant a
specic power output, which shall be exclusively covered
under Clause 2 hereinafter (“Limited Peak Power Warranty
– Limited Remedy”).
2. Limited Peak Power Warranty –
Limited Remedy
Astronergy provides two solutions of peak power
warranty base on the product types and contract terms as
below:
①
Standard Peak Power Warranty
Astronergy warrants that any module(s) exhibits a power
output no less than 90% of the nominal peak power at
Standard Testing Conditions (STC, defined as: (a) light
spectrum of AM 1.5, (b) an irradiation of 1000 W per m2
and (c) a cell temperature of 25 degrees Celsius at right
angle irradiation.) specified on the respective datasheet
within a period of 10 years from the warranty start date,
or any module(s) exhibits a power output no less than
80% of the nominal peak power at STC specified on the
respective datasheet within a period of 25 years from the
warranty start date.
②
Linear Peak Power Warranty
Astronergy warrants that module(s) exhibits a power
output no less than 97% of the nominal peak power at
STC specied on the respective datasheet within the rst
year from the warranty start date, or power output decline
1. Limited Product Warranty – Ten Year
Repair, Replacement or Refund Rem-
edy
Astronergy warrants its Crystalline photovoltaic solar
modules (hereafter referred to as “modules”), including
factory-assembled DC connectors and cables, if any, to
be free from defects in materials and workmanship under
normal application, conditions, use, installation, and
maintenance, within a period of 120 months from the day
of installation at the rst application, (hereafter referred to
as the “warranty start date”).
If a module is found defective in material or workmanship,
Astronergy will, at its sole discretion, repair or replace
the module, or refund the purchase price as paid by the
customer within the above specied period according to
the type of defect. For clarification purpose: “material or
workmanship defects” are dened per IEC 61215 Clause 7,
IEC 61215 Clause 10.1 and IEC 61730 Clause 10.1 for visual
defects, and per IEC 61215 entire Clause 10 for electrical
and mechanical defects. .
The options to repair or replace defective modules, or
refund the purchase price are the only and exclusive
remedies guaranteed under this Limited Warranty for
Crystalline PV Modules and shall not extend beyond the
period of 120 months set forth here. Remedies will be
performed directly to the customer only. This Limited