Specifications

TEST & MEASUREMENT
LEADER
837
LV 5800
LV58SER02
Eye Pattern Module Card (Input)
Installed in a LV 5800 input slot, the LV 58SER02 allows
eye pattern waveforms of SDI signals to be monitored.
Automatic measurement of parameters such as
amplitude, rise time, and fall time is also possible.
HD-SDI, SD-SDI, and DVB-ASI Format Support
Displays the SDI signal eye pattern or measures the
jitter of one system among up to six systems by
combining three SDI input units and
selecting A or B among the three modules. (Two EYE
units cannot be installed simultaneously.)
Displays the eye pattern of the timing jitter or
alignment jitter by switching the filter.
The eye pattern display allows automatic measurement of the eye
pattern amplitude, rise time, and fall time. The jitter display allows
automatic measurement of the timing jitter and alignment jitter values.
Jitter display allows V sweep and H sweep displays.
The multi display allows the eye pattern waveform and jitter waveform
to be displayed simultaneously. In addition, the eye pattern display
screen automatically measures the eye pattern amplitude, rise time,
and fall time, while the jitter display screen automatically measures
the timing jitter and alignment jitter.
LV58SER03
Composite Video Card (Input)
Two input connections for NTSC or PAL composite video signals.
Only one composite video input can be monitored at a time. One
connection is available for a switched output.
LV58SER04
MPEG Decoder Card (Input)
The module has a single input that decodes MPEG-2 TS (DVB-ASI)
signals and displays video/audio information on the monitor when
selected. All of the available LV5800 features (Vectorscope, Waveform
Monitor, Picture, Eye Pattern and Audio) can be used to monitor the TS
being fed to the module.
Additional displays available with this card include a PID
Tree Display and BIT Rate Display. In addition, extra error
detection categories are included.
LV58SER20
DVI-I Module Card (Output)
This unit allows the screen displayed on the LV 5800 to be
shown on an external monitor. The DVI output provides
both digital and analog output allowing the signal to be
used on a wide variety of XGA-compatible monitors. This
signal can be connected to a display via a DVI or VGA con-
nection. The video output is 1024x768 in display resolution.
LV58SER40A
Digital Audio Module Card (Input/Output)
This unit operates as a digital audio I/O unit when
installed in a LV 5800 input slot or a digital audio output
unit when installed in an output slot. For the 16-channel
data of AES/EBU 8 system, Lissajous, sound image, level
meter, signal status displays can be shown. If an SDI input
unit is installed in the LV 5800, this unit can process the
AES/EBU signal that is separated from the SDI signal.
The LV58SER40 can monitor 16 channels of embedded
audio. By installing an optional external I/O connector
board, the connector can be expanded to monitor/output
16 external channels of 8 AES/EBU systems.
Various Display Functions:
Displays the following items on the input AES/EBU signal.
Single Lissajous display between two arbitrary channels, multi
Lissajous display that shows 4 or 8 single Lissajous displays between
two arbitrary channels, sound image display, and level meter display.
AES/EBU status bits displayed include channel status, user, validity,
and parity bits. The various display and detection functions of this
unit cannot be assigned simultaneously to the LV 5800 multi screen.
LV58SER40A-16
AES/EBU Expansion Card (Input/Output)
Works in conjunction with the LV58SER40A card by providing four
additional connectors. A total of sixteen AES/EBU channels are made
available. Audio information from this card is locked to the directionality
of the LV58SER40A. This expansion card can be installed in the Input or
Output Slot, depending on where the LV58SER40A card is installed.
LV58SER40D
Digital Audio Module Card with Dolby E/AC-3
Daughtercard (Input)
Works in conjunction with the LV58SER40A card by providing four
additional connectors. A total of sixteen AES/EBU channels are made
available. Audio information from this card is locked to the directionality
of the LV58SER40A. This expansion card can be installed in the input or
output Slot, depending on where the LV58SER40A card is installed.
(212) 444-6601 • 1-800-947-9901• Quick Dial 821
PHOTO - VIDEO - PRO AUDIO
SD/HD-SDI Input Card
(Mfr # LV58SER01 • B&H # LELV58SER01)
.......
3799.95
Eye Pattern Unit
(Mfr # LV5800-OP02 • B&H # LEEPILV5800)
................
4794.95
Composite Video Card
(LELV5800OP03 )
..........................................
2849.95
MPEG Decorder Card
...................................................................................
Call
DVI-I Output Card
.........................................................................................
Call
Digital Audio Module Card (Mfr # LV5800-OP40 • B&H # LE8AILV5800)
...
Call
AES/EBU Expansion Card
..........................................................................
Call
Digital Audio Module Card with Dolby E
(Mfr # LV5800-OP40D • B&H # LE8AILV5800W)
...............................................
5514.95