Specifications
TEST & MEASUREMENT
LEADER
841
5222
(212) 444-6601 • 1-800-947-9901• Quick Dial 821
PHOTO - VIDEO - PRO AUDIO
NTSC/PAL/SECAM Waveform Monitor
A powerful component/composite waveform monitor, the 5222 handles
8 channels in A/B groups of 4 with the ability to overlay parades of 3 x 3
component signals. A picture display of the selected channel shows program
material with a line-select strobe. The 5222 sets up automatically to 525/60
or 625/50 (or menu select) and a TIMING mode sets up bowtie observations.
Full line selection is provided with line number notation applicable to NTSC
or PAL and a 1-10 line window. Extensive operating options available under
menu control include level and time/frequency cursors that read in volts, IRE
units, % or dB and time/frequency units. Components are handled in GBR or
YCbCr form. Calibration is menu controlled as well as DC restorer speed and
sample point.
◆ Eight video inputs and one external reference
input channel. Y/C input connectors.
◆ Precision cursors permit signal level
measurements and time with 0.5% accuracy.
Level cursors read in volts, IRE, % and dB.
◆ Display video signals as a picture monitor on
the CRT. In line select mode, selected line is
highlighted for identification on the picture.
◆ RGB/YRGB display function
◆ Up to four waveforms, including the external
reference can be simultaneously displayed
Parade (side-by-side) or ALT (overlaid).
◆ One or two lines of a video signal can be
displayed for convenient observation of VITS,
VIR, or teletext signals. Line select is also
useful to test video camera characteristics. .
◆ The component signal can be displayed in
the bowtie configuration
◆ FLAT and LUM (Iow-pass filter) filtered charac-
teristics can be displayed simultaneously.
◆ Up to 10 settings, including vertical and hori-
zontal positioning, can be stored in memory,
and recalled from the front panel or via the
remote control connector on the rear panel.
5212 NTSC/PAL Vectorscope
Operating automatically in NTSC or PAL, the 5212 overlays vector displays for
4 signals (3 input channels plus an external reference.) A touch on AUTO PHASE
automatically zeros burst to the -B-Y (-U) axis using the reference chosen from any
channel or an external reference. Digital phase readout makes it easy to measure
precise phase differences between channels. Of particular value is semi-automatic
setup for high-resolution measurements of differential phase and gain.
Other features include menu selected calibration for signals with or without setup
and for 75% or 100% color bars. A +V key inverts -V signals for a less cluttered PAL
display. Up to 10 front panel setups may be stored for instant recall and remote
control with line select strobe is provided via connection to a 5222 waveform monitor.
◆ Three video inputs and one external
reference input channel
◆ Up to four waveforms, including the external
reference, can be displayed simultaneously.
◆ Automatic NTSC/PAL system detection
◆ Digital phase control ensures a phase
measurement accuracy of within 1% and
display resolution, of within 0.1% with
alphanumeric readout.
◆ Accurate measurement of differential gain
DG and differential phase DP with
alphanumeric readout.
◆ The level and phase of stereo audio signals
can be measured (X-Y display function).
◆ Storage/recall of 10 front panel setups
including vertical and horizontal positioning
from the front panel or via the remote control
connector on the rear panel.
◆ Y/C input allows the C signal vector to be
displayed by respectively applying the Y
signal and C-signal to the CH1 and CH2 input
connectors.
◆ Can be remotely controlled when combined
with the 5222. The line selected by the
waveform monitor is displayed automatically.
◆ Runs on universal power supply (90-250v AC,
48-440 Hz)
5222
(Mfr # 5222 • B&H # LE5222)
...........................................................................CALL
5212
(Mfr # 5212 • B&H # LE5212A)
....................................................................4674.95