Specifications

TEST & MEASUREMENT
LEADER
840
LV 5152
w ww.bhphotovideo.com
PHOTO - VIDEO - PRO AUDIO
Multiformat Waveform Monitor
The LV 5152 displays analog component signals of multiformat DTV. It
features two analog component signal input systems. In addition to the
waveform monitor function, vector, timing, and audio signal display
functions are provided. Moreover, the full line selector function and control
setting menus are provided.
Applications include production testing of multiformat HD/ SD products,
off-air transmitter monitoring of 1080/720/480 signals when used with a
set top box and a color monitor. Post production and telecine rooms are
supporting the increase in demand for multiformat testing including the
increasingly common use of 1080/23.98p and 24p standard formats.
◆ Analog component YPbPr/GBR monitoring,
overlay and parade
◆ Supports 1080/60i, 1080/50i, 1080/48i,
720/60p, 480-60p/60i, 576-50p/50i
◆ Precision cursor measurements for level and
time/frequency. Cursor level, time and fre-
quency measurements have a 0.5% accuracy.
◆ Conversion matrix for YPbPr to GBR simplifies
signal level monitoring.
◆ Full Line Select for all formats
◆ Timing (Bowtie) measurements
◆ Stereo Phase/Amplitude monitoring
◆ Picture monitor output is provided in the se-
lected format required by the monitor.
◆ Vectorscope function (SMPTE 274M, 296M)
displays color difference signal of component
signals in vector format. The analog GBR signal
is converted into color difference signals with
a matrix and displayed in vector format.
◆ Stores/recalls up to 10 front panel settings
and frequently used measurement conditions
for one button recall.
LV 5152DA
HDTV Digital Waveform Monitor
The LV 5152DA can display 720p, 1080i and 1035i-Iine formats of serial digital
and component analog signal inputs. It features two SDI input systems and one
analog component signal input system. In addition the waveform monitoring,
vectorscope, timing with bowtie, and audio signal display functions are
provided. Digital input signals can be analyzed for transmission error
monitoring, equivalent cable length measurement and digital video data
dump functions are provided. Stores/recalls up to10 front-panel settings.
◆ Two SDI digital inputs and active SDI output
to resend the selected SDI input.
◆ Analog input (Y, PB, PR or GBR) enables the
monitoring and then the comparison of the
analog to digital signals in waveform, vector
and picture modes. Full bandwidth Y, PB, PR
may be transcoded and output as GBR.
◆ Equivalent cable length measurement
indicates the serial digital signal level applied
to the input connector as the coaxial cable
length instead of the actual level.
◆ Stores/recalls up to 10 panel settings
◆ Digital audio signals are separated from the
SDI input and output as four AES/EBU pairs.
◆ Error logger and contents display functions
for HD-SDI. Monitors incorrect level of signals
converted from Y, PB, PR into GBR format.
◆ Displays color difference signals in vector for-
mat. The HD-SDI signal is decoded to analog
GBR, converted into color difference signals
with a matrix and displayed in vector format.
◆ For picture monitor output, SDI signals are
converted to component (Y/PB/PR or GBR)
which is then output to the picture monitor.
◆ Selectable waveform format of Y, PB, PR to
GBR simplifies signal level monitoring. Also,
GBR parade order is selectable as RGB.
◆ Full-line selector enables selection and
display of video lines from field 1/ 2 or both.
◆ Level, time and frequency measurements are
accomplished with 0.5% accuracy.
◆ Analog stereo audio signals can be displayed
in standard X-Y lissajous format.
◆ The timing display mode can monitor time
and amplitude differences between channels
in analog and digital modes.
LV5152 (Mfr # LV5152 • B&H # LELV5152) ..............................................................CALL
LV5152DA
(Mfr # LV5152DA • B&H # LELV5152DA)
..............................................CALL