Instruction manual

WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL

CHAPTER 1 CONCERNING THE WM-3004

The WM-3004 is a compact, lightweight and portable LCD waveform monitor which comes in handy

for monitoring the pictures being shot during live broadcasts, on location or in studios, etc.

The camera battery is supported as the power supply so that pictures, waveforms and sound can be

checked even in locations where difficulties have been encountered in the past in carrying in

equipment.

A full range of functions is provided including functions for adjusting the brightness, contrast and

chroma levels as well as functions for displaying markers.

Input signals in a total of 23 HDTV video formats are supported.

1.1 Outline of WM-3004

 6.4-inch a-Si TFT LCD panel featured

 HD-SDI or YPbPr HD analog input signals (Y-on-sync) supported

 23 different video formats supported

Standards supporting HD-SDI: SMPTE 292M, BTA-S004B standards complied with (1.485

Gbps SDI input)

Standards for analog input and supported formats: SMPTE 274M, SMPTE 296M,

BTA-S001B standards complied with

 SDI IN (×2), SDI MONITOR OUT, HD analog input (ANALOG Y, ANALOG Pb,

ANALOG Pr) and REF IN connectors provided

 Brightness, contrast, chroma, filter, monochrome, Y gamma adjustment functions

 Marker display functions (frame, center, 4:3, 13:9, 14:9, 2.35:1, 1.85:1, 1.66:1)

 Single-action operation of input channels, partial display/non-display of information, picture

overlay and freeze/update selection using the switches on the front panel

 Lighting of red, green LEDs at top of screen by external contact supply-type tally inputs

 Automatic scanning of input signals possible

 Automatic 1/1.000 and 1/1.001 frame rate scanning and input signal detection functions

 CRC error detection function (during HD-SDI input) for input channels

 Functions for locking the panel switches and storing the setting values

 Light weight and compact size

 DC supply power input (10-18V)

 Camera battery supported