Instruction manual

WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL
46
[Description of operations]
Switch Description of function
FUNC switch (Not used)
Adjustment dial Use the dial to select the items to be set.
Setting switch
Press this to select the format, set the reference or initialize the
setting of the currently selected channel (reset to the CRC error
count). Refer to section 4.6.
If the freeze status is established when the format is selected, it is
released.
F1 switch (Not used)
F2 switch (Not used)
F3 switch
Animation
Press this to set the icon animation to ON or OFF.
F4 switch
ErrorCount
Press this to reset the CRC error count and elapsed time.
F5 switch
AllInitialize
When this is held down, the settings of all the channels are
initialized, and the CRC error count is reset. Refer to section 4.6.