Instruction manual

WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL
39
3.3.5.2 VECTOR mode setting screen
<<Functions>>
The signals on the vectorscope can be displayed, and the following settings can be
performed.
• V ancillary (Vect) switching
• Scale switching
• LPF (Vect) switching
<<Screen>>
[Description of operations]
Switch Description of function
FUNC switch
This switches the display to the normal screen.
(Refer to section 3.3.5.1)
Adjustment dial (Not used)
Setting switch (Not used)
F1 switch (Not used)
F2 switch
V anc(Vect) ON/OFF
Press this to set V ancillary to ON or OFF.
This takes effect only when the VECTOR mode is established.
F3 switch (Not used)
F4 switch
Scale 100%/75%
Press this to switch the scale between 100% or 75%.
F5 switch
LPF(Wave) ON/OFF
Press this to set the low-pass filter (Vect) to ON or OFF.
This takes effect only when the VECTOR mode is established.
YCRCE:000000000 PCRCE:000000000 (LAST:00:00:00/TIME:00:00:00）
Input SDI A
Format AUTO
(1080i
60.00)
Int
V anc(Vect)
ON
OFF
Scale
100%
75%
VITC:--:--:--:--
Field 1
Line(Field) 0001
Line(Frame) 0001
×1.00
LPF(Vect)
ON
OFF
WAVEFORM MONITO
R
HD LCD
WM-3004
INPUT
F1
DISPLAY
F2
OVERLAY
F3
FREEZE
F4
FUNC
F5
LOCK
OFF
ON
POWE
R
|
○
PICTURE
MENU
STATUS
2
1
3
1
2
WAVE
V
ECTO
R
AUDIO