Instruction manual

WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL
34
3.3.4.5 CURSOR setting screen
<<Functions>>
The waveforms can be displayed, and the following setting can be performed.
• H and V cursor display and difference display (mV, µs)
<<Screen>>
[Description of operations]
Switch Description of function
FUNC switch
Press this to return the display to the function screen.
(Refer to section 3.3.4.1)
Adjustment dial Use this to move the cursor horizontally or vertically.
Setting switch (Not used)
F1 switch
H
Press this to set the H cursor to ON or OFF.
F2 switch
V
Press this to set the V cursor to ON or OFF.
F3 switch
MOVE BASE/OFFSET/TRACK
Press this to select the cursor (BASE, OFFSET or TRACK) to be
moved.
F4 switch
H/V
Press this to select the cursor (H or V) to be moved.
F5 switch (Not used)
YCRCE:000000000 PCRCE:000000000 (LAST:00:00:00/TIME:00:00:00）
Input SDI A
Format AUTO
(1080i
60.00)
Int
YPbPr
Parade
1H Mx1
G x1.00
H
V
dT 8.00µs
d% 20.00%
MOVE
BASE
OFFSET
TRACK
H/V
H
V
VITC:--:--:--:--
Field 1
Line(Field) 0001
Line(Frame) 0001
WAVEFORM MONITO
R
HD LCD
WM-3004
INPUT
F1
DISPLAY
F2
OVERLAY
F3
FREEZE
F4
FUNC
F5
LOCK
OFF
ON
POWE
R
|
○
PICTURE
MENU
STATUS
2
1
3
1
2
WAVE
V
ECTO
R
AUDIO