Instruction manual

WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL
33
[Description of operations]
Switch Description of function
FUNC switch Press this to return the display to the function screen.
(Refer to section 3.3.4.1)
When setting the gain
GainVal
Use the dial to set the magnification
rate of the gain. (Variable range:
0.03 to 7.97)
Adjustment dial
When scrolling Scroll Use the dial to scroll vertically or
horizontally.
When setting the gain
GainVal
The gain is an integral value after
the decimal places have been
rounded down (with a figure or 4 or
below) or rounded up (with a figure
of 5 or above). (All values below
1.00 are set to 1.00; similarly, all
values above 7.00 are set to 7.00.)
If the gain magnification rate is an
integer, it is increased in 1.00
increments, and when 7.00 is
reached, it is returned to 1.00.)
Setting switch
When scrolling Scroll Use the switch to reset the scrolling.
F1 switch
GAIN x*.**
Press this to switch the adjustment dial and setting switch functions
to gain.
F2 switch
MAG x1/x2/x4
Press this to select the MAG magnification rate (1X, 2X or 4X).
F3 switch
RENC GainVal/Scroll
Press this to switch the adjustment dial function between the gain
setting and scrolling.
F4 switch
UP DOWN/LEFT RIGHT
Press this to select vertical (up/down) or horizontal (left/right)
scrolling.
F5 switch (Not used)