Instruction manual

WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL
31
[Description of operations]
Switch Description of function
FUNC switch
Press this to return the display to the function screen.
(Refer to section 3.3.4.1)
F1 switch
1H
1H
F2 switch
2H
2H (with interlacing or segmented frame format)
In the line select OFF status, the odd-numbered fields are displayed
on the left side, and the even-numbered fields are displayed on the
right side.
In the line select ON status, the selected line is displayed on the left
side, and the next line in the selected field is displayed on the right
side.
F3 switch
1F
1F
The horizontal blanking data is not displayed.
F4 switch
2F
2F (with interlacing or segmented frame format)
The odd-numbered fields are displayed on the left side, and the
even-numbered fields are displayed on the right side.
The horizontal blanking data is not displayed.
F5 switch
LineSelect
Press this to set line selection to ON or OFF.
In the line select ON status, the lines are incremented or
decremented using the adjustment dial, and the field is switched
using the setting switch. (This applies with 1H or 2H only; field
switching applies only with interlacing or segmented frame format.)