Instruction manual

WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL
24
3.3.2.2 Picture settings 2 screen
<<Functions>>
The input images can be displayed, and the following settings can be performed.
• Selection of display or non-display for green, blue and red signals of the displayed
pictures. (This affects only the picture display.)
<<Screen>>
[Description of operations]
Switch Description of function
FUNC switch
This switches the display to the picture settings 1 screen.
(Refer to section 3.3.2.1)
F1 switch
Green
Press this to select whether to display the green signals of the input
pictures.
F2 switch
Blue
Press this to select whether to display the blue signals of the input
pictures.
F3 switch
Red
Press this to select whether to display the red signals of the input
pictures.
F4 switch (Not used)
F5 switch (Not used)
WAVEFORM MONITO
R
HD LCD
WM-3004
INPUT
F1
DISPLAY
F2
OVERLAY
F3
FREEZE
F4
FUNC
F5
LOCK
OFF
ON
POWE
R
|
○
PICTURE
MENU
STATUS
2
1
3
1
2
WAVE
V
ECTO
R
AUDIO
YCRCE:000000000 PCRCE:000000000 (LAST:00:00:00/TIME:00:00:00）
Input SDI A
Format AUTO
(1080i
60.00)
Int
FRAME CENTER
4:3 13:9 14:9
2.35:1 1.85:1 1.66:1
Y-Gamma 1.000
Bright 0.00%
Contrast 100.0%
Pb(Cb) 100.0%
Pr(Cr) 100.0%
Filter ON
Mono OFF
FRC OFF
G B R
Green
VITC:--:--:--:--
Blue
Red