Instruction manual

WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL
23
3.3.2 PICTURE2 mode
3.3.2.1 Picture settings 1 screen
<<Functions>>
The input images can be displayed, and the following settings can be performed.
• Filter
• Monochrome
• FRC
• Markers
<<Screen>>
[Description of operations]
Switch Description of function
FUNC switch
This switches the display to the picture settings 2 screen.
(Refer to section 3.3.2.2)
F1 switch
Filter
Press this to set the filter to ON or OFF.
F2 switch
Mono
Press this to set monochrome to ON or OFF.
F3 switch
FRC
Press this to set the 8-bit processing using frame rate control to ON
or OFF.
F4 switch (Not used)
F5 switch
Marker
Press this to set the markers to ON or OFF. At the marker ON
setting, select the markers using the adjustment dial and enter the
selection using the setting switch
WAVEFORM MONITO
R
HD LCD
WM-3004
INPUT
F1
DISPLAY
F2
OVERLAY
F3
FREEZE
F4
FUNC
F5
LOCK
OFF
ON
POWER
|
○
PICTURE
MENU
STATUS
2
1
3
1
2
WAVE
V
ECTO
R
AUDIO
YCRCE:000000000 PCRCE:000000000 (LAST:00:00:00/TIME:00:00:00）
Input SDI A
Format AUTO
(1080i
60.00)
Int
FRAME CENTER
4:3 13:9 14:9
2.35:1 1.85:1 1.66:1
Y-Gamma 1.000
Bright 0.00%
Contrast 100.0%
Pb(Cb) 100.0%
Pr(Cr) 100.0%
Filter ON
Mono OFF
FRC OFF
G B R
Filter
Mono
FRC
Marker
VITC:--:--:--:--