Instruction manual

WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL
15
Item Description Display modes
G
This indicates whether the input video green (G) signal
is to be displayed.
P1P2
B
This indicates whether the input video blue (B) signal is
to be displayed.
P1P2
R
This indicates whether the input video red (R) signal is
to be displayed.
P1P2
(Marker)
This indicates a list of the usable markers. The
currently selected marker is highlighted.
P1P2
Y-Gamma
This indicates the Y gamma setting.
P1P2
Bright
This indicates the brightness setting.
P1P2
Contrast
This indicates the contrast setting.
P1P2
Pb(Cb)
This indicates the Pb (Cb) setting.
P1P2
Pr(Cr)
This indicates the Pr (Cr) setting.
P1P2
YPbPr / GBR
This indicates the waveform display method. W
Parade / Overlay
This indicates the parade display or overlay display for
the waveforms.
W
1H / 2H / 1F / 2F
This indicates the sweep 1H/2H/1F/2F switching. W
M x1 / x2 / x4
This indicates the MAG magnification rate. W
G x*.**
This indicates the GAIN magnification rate. W
dT
This indicates the H cursor difference. It does not
appear unless the H cursor is displayed.
W
d% / dV
This indicates the V cursor difference. It does not
appear unless the V cursor is displayed.
W
Field 1 / Field 2
This indicates the currently displayed field. It does not
appear unless LineSelect is set to ON.
WVS
Line (Field)
This indicates the line number in the currently displayed
field. It does not appear unless LineSelect is set to
ON.
WVS
Line (Frame)
This indicates the line number. It does not appear
unless LineSelect is set to ON.
WVS
Sample
This indicates the sample number. S
x 1.00
This indicates the GAIN magnification rate. V
This indicates the position of the displayed waveform. W
Volume
This indicates the volume level. A
L:xCH R:xCH
This indicates the embedded audio channels through
which the sound is output.
A
Information
This indicates the color of the characters.
P1P2P3WV
SAM
Marker
This indicates the color of the markers.
P1P2P3
Scale
This indicates the color of the scale.
WVSA
Waveform
This indicates the color and brightness of the
waveforms.
W
Cursor
This indicates the color of the cursors.
WVS
Vector
This indicates the color and brightness of the vectors. V
Status
This indicates the color of the status.
SA
Abbreviations used in display mode column:
P1・・・PICTURE1, P2・・・PICTURE2, P3・・・PICTURE3, W・・・WAVEFORM, V・・・VECTOR, S・・・STATUS,
A・・・AUDIO, M・・・MENU