Instruction manual

WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL
13
3.3 Operation and how to use the switches
This section describes the displays which appear on the WM-3004 screen and the setting
methods involved.
<<Screen displays>>
Note: The area enclosed by the dotted lines in the figure is the image area. Normally, its size
is 960 × 540 pixels.
[Description of modes]
The modes are described in the sections listed below.
PICTURE1 mode (refer to section 3.3.1)
PICTURE2 mode (refer to section 3.3.2)
PICTURE3 mode (refer to section 3.3.3)
WAVEFORM mode (refer to section 3.3.4)
VECTOR mode (refer to section 3.3.5)
STATUS mode (refer to section 3.3.6)
AUDIO mode (refer to section 3.3.7)
2 mode (refer to section 3.3.3)
HELP mode (refer to section 3.3.9) This mode is indicated as "1" in terms of the position
set by the mode switch on the main unit.
MENU mode (refer to section 3.3.8)
WAVEFORM MONITO
R
HD LCD
WM-3004
INPUT
F1
DISPLAY
F2
OVERLAY
F3
FREEZE
F4
FUNC
F5
LOCK
OFF
ON
POWE
R
|
○
PICTURE
MENU
STATUS
2
1
3
1
2
WAVE
V
ECTO
R
AUDIO
960
540
NoSignal
YCRCE:000000000 PCRCE:000000000 (LAST:00:00:00／TIME:00:00:00）
Input SDI A
Format AUTO
(1080i
60.00)
Int
VITC:--:--:--:--