Instruction manual

WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL

2.2 WM-3004 rear panel view and parts

WM-3004 rear panel view

Names of rear panel parts

Number Part Description of function

<1> Power socket (*1)

Cannon connector, DC power input socket (GND: pin 1; DC IN:

pin 4).

<2> SDI IN Ach HD-SDI signal input connector.

<3> SDI IN Bch HD-SDI signal input connector.

<4> Y IN

HD analog Y signal input connector; synchronization is provided

by the Y signal in the case of analog inputs.

<5> Pb IN HD analog Pb (Cb) signal input connector.

<6> Pr IN HD analog Pr (Cr) signal input connector.

<7> MONITOR OUT

Output connector for simplified monitoring of SDI input

signals.SDI A

SDI A images are output when the SDI A input is selected.

SDI B images are output when the SDI B input is selected.

SDI A images are output when the analog input is selected.

<8> REF IN Reference input signal connector (HD tri-level sync only).

<9> TALLY connector (*2) D-sub 9-pin (female)

<10>

Termination selector

switch (*3)

This is used to enable or disable the 75Ω termination for the analog

signals.

<1>

<9>

<2>

<3>

<4>

<5>

<6>

<10>

<8>

<7>