Instruction manual

9
 Status mode: Sequentially displays digital values obtained from arbitrarily sampled lines
of input pictures.
• Allows for single-action movement to EAV/SAV position.
• Can display not only video data but also auxiliary data for sampled lines.
• Indicates audio levels in a bar graph (only when HDTV SDI signals are input).
 Menu mode
• Sets the mode of input signals (SDI or ANALOG).
• Sets the format.
• Sets the values of BRIGHT, CONTRAST, Pb (Cb), Pr (Cr) and CHROMA options.
• Selects from the CHROMA ON/OFF options.
• Sets the value of CONTRAST for the overlay mode display of input video
(NORMAL/DIM).
• Sets the waveform display (YP (YC) or GBR).
• Sets the scale of the waveform display (% or V).
• Selects a marker for vectorscope mode display (100% or 75%).
• Resets the error count.
• Calls up the saved settings, saves settings, and initializes the settings.