Instruction manual
5
CONCERNING IMPACT
This is a precision instrument and, as such, subjecting it to impact may cause malfunctioning. Take
special care when moving the monitor.
CONCERNING THE LIQUID CRYSTAL DISPLAY PANEL
The LCD panel is a high-precision part and, as such, the following care must be taken in its
handling.
1) Wiping the panel's surface with benzine, paint thinners, etc. will cause deterioration in its
quality.
2) If water (salty water) is left on the display surface, discoloration and staining will result.
3) Exposing the panel directly to ultraviolet rays for an extended period may cause the deflection
panel to turn brown, the contrast to drop and other forms of deterioration in the display
quality.
4) Moisture inside the monitor due to condensation, etc. may cause unevenness in the colors.
5) Due to the nature of liquid crystal, some picture elements may be missing (bright spots or
dark spots).
6) Directly tapping the surface or bumping it into objects will cause cracking, etc.
7) Do not attempt to disassemble the panel, as leaking liquid crystal may be harmful if it comes
into contact with your skin.
8) If you are exposed to liquid crystal because tube surface has broken, rinse it off well with
soap and water.
CONCERNING THE OPERATION LOCATION
If the monitor is used indoors, no special care need be taken. However, installation in the
following locations can cause malfunctioning.
1) Locations with an ambient temperature outside the range of 5 to 40°C
2) Locations with an ambient humidity outside the range of 30 to 80% RH
3) Locations near an air conditioner or subject to rapid temperature changes or the formation of
condensation
4) Locations exposed to direct sunlight (*1)
5) Locations exposed to corrosive gases or high concentrations of dust
6) Locations where strong magnetic fields are generated
7) Locations which may be splashed with water, oil, chemicals, etc.
8) Very dusty locations or locations to which vibrations are transmitted from the floor
9) Unstable locations
*1: Since the panel's backlight may be damaged when the surface temperature of the LCD panel exceeds
60
°C, keep the panel away from direct sunlight.