Instruction manual

21
 Functions Available when F5 (SCROLL) Is Pressed
Switch
Name
Number Marked in
Front View
Description of Function
F1  Scrolls the magnified waveform upward.
F2  Scrolls the magnified waveform downward.
F3  Scrolls the magnified waveform to the right.
F4  Scrolls the magnified waveform to the left.
F5  Resets the point of scrolling.
 F1:
(SCROLL UP)
Scrolls the magnified waveform upward.
This option is effective only when the ×2 or ×4 option of V GAIN is selected, and
not shown in the menu when the ×1 option is selected.
 F2:
(SCROLL
DOWN)
Scrolls the magnified waveform downward.
This option is effective only when the ×2 or ×4 option of V GAIN is selected, and
not shown in the menu when the ×1 option is selected.
 F3:
(SCROLL
RIGHT)
Scrolls the magnified waveform to the right.
This option is effective only when the ×2 or ×4 option of H MAG is selected, and
not shown in the menu when the ×1 option is selected.
 F4:
(SCROLL LEFT)
Scrolls the magnified waveform to the left.
This option is effective only when the ×2 or ×4 option of H MAG is selected, and
not shown in the menu when the ×1 option is selected.
 F5:
(RESET)
Resets the point of scrolling.
This option reverts the waveform to be displayed to the black-level waveform for
the starting point of an on-screen picture.
 Functions Available when LINE SELECT Menu Is Enabled
Switch
Name
Number Marked in
Front View
Description of Function
F1  Increments the lines.
F2  Decrements the lines.
F3  Turns on/off the line select function.
F4  Switches between the fields.
F5 
 F1:
(LINE INC)
Increments the number of lines to be selected.
You can specify the number and show waveforms on a 1H-sweep basis. If
you select a 2H-sweep display, the monitor presents a 2H-sweep display of
waveforms. This option is not shown in the menu when LINE SEL is set to
OFF.
 F2:
(LINE DEC)
Decrements the number of lines to be selected.
You can specify the number and show waveforms on a 1H-sweep basis. If
you select a 2H-sweep display, the monitor presents a 2H-sweep display of
waveforms. This option is not shown in the menu when LINE SEL is set to
OFF.
 F3:
(LINE SEL OFF/ON)
Turns on/off the line select function.
 F4:
(FIELD)
Switches between the fields.
This option is effective only when the input signal is in the interlace format