Instruction manual

19
 Functions Available when F1 (DISPLAY) Is Pressed
Switch
Name
Number Marked in
Front View
Description of Function
F1  Parade display
F2  Overlay display
F3  Turns on/off channel 1 (Y/G).
F4  Turns on/off channel 2 (Pb/B).
F5  Turns on/off channel 3 (Pr/R).
 F1:
(PARADE)
Presents a 1H/1F-sweep display of Y/Pb/Pr or G/B/R waveforms by placing them
next to one another.
 F2:
(OVERLAY)
Shows Y/Pb/Pr or G/B/R waveforms by overlaying them on top of each other.
 F3:
(Y/G)
Shows the waveform of channel 1 (Y/G).
Pressing this switch with the parade display selected shows only the Y/G
waveforms of the overlay display.
 F4:
(Pb(Cb)/B)
Shows the waveform of channel 2 (Pb(Cb)/B).
Pressing this switch with the parade display selected shows only the Pb(Cb)/B
waveforms of the overlay display.
 F5:
(Pr(Cr)/R)
Shows the waveform of channel 3 (Pr(Cr)/R).
Pressing this switch with the parade display selected shows only the Pr(Cr)/R
waveforms of the overlay display.
 Functions Available when F2 (SWEEP) Is Pressed
Switch
Name
Number Marked in
Front View
Description of Function
F1  Presents a 1H-sweep display of waveforms on the screen.
F2  Presents a 2H-sweep display of waveforms on the screen.
F3  Presents a 1F-sweep display of waveforms on the screen.
F4  Presents a 2F-sweep display of waveforms on the screen.
F5 
 F1:
(1H)
Presents a 1H-sweep display of waveforms on the screen.
 F2:
(2H)
Presents a 2H-sweep display of waveforms on the screen.
This option is selectable only when the input signal is in the interlace format or
segment frame format, and not shown in the menu in the case of the progressive
format.
 F3:
(1F)
Presents a 1F-sweep display of waveforms on the screen.
This option is selectable only when all lines are sampled, and not shown in the
menu when the LINE SEL switch is set to ON.
 F4:
(2F)
Presents a 2F-sweep display of waveforms on the screen.
This option is selectable only when the input signal is in the interlace format or
segment frame format and all lines are sampled; the option is not shown in the
menu in the case of the progressive format, or the LINE SEL switch is set to ON.