Instruction manual

4.2.3 Waveform Mode

• By default, this mode displays a 1H-sweep waveform of input video. You can select from the

1H, 2H, 1F, and 2F sweep options for the waveform to be displayed. Note that you can select

the 2H and 2F-sweep displays only when the input video is in the interlace format or

segment frame format.)

• You can select a Y/Pb/Pr (YCbCr) or G/B/R signal to display its waveforms. Use the menu

mode to switch between the waveforms to be displayed.

• The overlay display function of the waveform mode overlays the Y/Pb/Pr or G/B/R

waveforms.

• The parade display function of the waveform mode places the Y/Pb/Pr or G/B/R waveforms

next to one another. This function presents only a 1H (1F)-sweep display even when you

have selected the 2H (2F)-sweep display.

• If you change a parade display to an overlay display, the waveform mode provides only a 1H

(1F)-sweep display. The mode does not retain the 2H (2F)-sweep display settings.

• The V GAIN and H MAG magnification functions are available. You can choose from ×1

(default), ×2, and ×4 options.

• Use the H MAG magnification function for a 1H-sweep overlay display only.

• The line select function (LINE SEL switch) is available.

When this function is used, the monitor provides a 1H-sweep display (or 2H-sweep display,

if this display has been selected).

• When an HDTV signal is being input, turning off the line select function results in the

sampling of lines through a decimation process.

• When an SDTV signal is being input, turning off the line select function results in the

sampling of all lines.

• You can use the settings of selected lines also in other modes since the settings are retained.

• The picture overlay function (OVERLAY switch) is available.

When the line select function is in use, the position of a selected line is shown on the overlay

picture.

Switch Name

Number Marked in

Front View

Description of Function

FUNCTION 

Switch for driving the menu of functions.

Pressing the FUNCTION switch and then one of the F1 to F5 switches

selects the function of that switch.

F1: DISPLAY, F2: SWEEP, F3: CURSOR, F4: GAIN/MAG, F5: SCROLL

(shown only for the GAIN/MAG magnification function)

 FUNCTION:

Switch for driving the menu of functions.

The texts DISPLAY, SWEEP, CURSOR, GAIN/MAG and SCROLL (shown only for the

GAIN/MAG magnification function) appear on the screen next to the F1, F2, F3, F4, and F5

switches, respectively. Pressing one of the F1 to F5 switches when these texts are on screen

shows the menu for adjusting the function of that switch.