Instruction manual

17
4.2.2 Picture Mode
• This mode displays input pictures in color.
• In this mode, you can only work with the on-screen markers (center marker, and frame marker
with an aspect ratio of 4:3, 13:9, 14:9, or 2.4:1).
• The name of a selected marker is shown in reverse video.
• Use the menu mode to adjust pictures using the brightness, contrast, Pb (Cb), Pr (Cr), and
chroma controls or show/hide the chroma control.
Switch
Name
Number Marked in
Front View
Description of Function
F1  Turns on/off the center marker.
F2  Turns on/off the frame marker (16:9) and safety marker (16:9 [90%]).
F3  Selects from the 4:3/13:9/14:9 markers.
F4  Turns on/off the 2.4:1 marker.
F5  Turns on/off the menu of functions.
 F1:
(CENTER)
Shows the cross marker in the middle of the picture view area.
 F2:
(FRAME)
Shows the frame marker (solid outline) and safety marker (dotted outline)
in the picture view area. The frame marker has an aspect ratio of 16:9, and
the safety marker is shown inside the frame marker at 90% the size
thereof.
 F3:
(4:3/13:9/14:9)
Selects from the 4:3/13:9/14:9 markers (vertical lines). Each press of this
switch cycles through the 4:3, 13:9, and 14:9 markers.
 F4:
(2.4:1)
Shows the 2.4:1 marker (horizontal line).
 F5:
(FUNCTION DISPLAY)
Shows the menu of the functions (cursor names) of the F1 to F4 switches.
Note: Care must be taken since when the 1035 format is used, each of the center marker, the frame
marker, and the 4:3, 13:9, 14:9, and 2.4:1 markers takes a 1080 format value.