Instruction manual

12
4-pin round male camera connector
TALLY_R (pin 1)
TALLY_G (pin 2)
DC IN (12 V)
IN(12V)
TALLY
Y
Silk-screen printed on chassis
GND (pin 1)
N.C.
(pin 2)
GND (pin 1)
GND (pin 3)
DC12V (pin 4)
N.C. (pin 3)
4-pin round female camera connecto
r
• The pin assignments of the power supply and tally connectors are as shown in the figure above
(power supply connector on the left and tally connector on the right). Be careful, as the two
connectors have different pin assignments even though they look identical.
• To turn on the TALLY 1 (red) lamp, short-circuit the pins marked .
• To turn on the TALLY 2 (green) lamp, short-circuit the pins marked .