Instruction manual

Chapter 2 CONTROL METHODS (CONTROL MODES)

Table Control method using VG series generator

Setting item Description Setting Description

0 SELECTION mode *2 Mode Output mode selection

1 DISTRIBUTION mode *2

1 Input port 1 In Input port selection

2 Input port 2

1 Output port 1

2 Output port 2

3 Output port 3

4 Output port 4

5 Output port 5

6 Output port 6

7 Output port 7

Out *1 Output port selection

8 Output port 8

*1 When “SELECTION mode” has been set as the output mode, the TMDS, DDC and

CEC signals are all switched; when “DISTRIBUTION mode” has been set as the

output mode, only the DDC and CEC signals are switched.

*2 For further details on the SELECTION mode and DISTRIBUTION mode, refer to

“3.1 Output modes” (on page 15).

CAUTION