Instruction manual

4
1.4 Sequence of settings
Follow the sequence of steps below when using the VD-1673.
(1) Set the control mode.
Select the control mode, and set it using the CONFIGURATION switches on the front panel of
the VD-1673.
(2) Connecting the units
Connect the units to the HDMI input and output ports of the VD-1673.
(3) Setting the input ports
Select the input ports in line with the control mode selected.
(4) Setting the output ports
Select the output ports in line with the control mode selected.
(5) Setting the output mode
Select the output mode in line with the control mode selected.
(6) Set the pre-emphasis level.
Set the pre-emphasis level of the TMDS signals.