Instruction manual

6
1.5. Version up
Version up is performed by using the USB flash.
(1) Save the [VerUp] folder of the version up data in the root folder of the USB flash.
Fig Structure of the version up data.
(2) Turn off the VA-1830. Insert the USB flash to the VA-1830.
(3) Turn on the VA-1830.
(4) After a few seconds, the THROUGH LED of the front panel blinks. Version up completes.
caution
Please do not turn off the power of the V
A
-1830 during version
up.
VerUP
Firm
mainFpga
VA1830Boot.bin
VA1830Std.bin
CPU_BOOT.bin
CPU_Vxxx.bin
Root Folder