User guide
11 Conguring the output multiplexer
Clicking on the “Output Mux” submenu takes you to the output multiplexer settings
Figure 14: Example view of the output multiplexer
The received IP RX is supplied via the BNC socket on the front and can be inverted prior to con-
version to ASI (inversion on / off). In addition the packet length can be determined to 188 or 204.
There is also the possibility to bypass one of the 16 ASI streams from the backplane to the BNC
socket on the front panel as well as the internal test generator signal (see chapter 6)
17
User Guide
U 262