User guide
6 Test generator
Clicking on the „Test Gen“ submenu takes you to the test generator settings. This internal test
generator is able to produce a test signal in order to perform a connection test, for example, and
to test this connection using a data stream.
Figure 7: Conguring the test generator
The generated data stream comprises zero packets with a length of 188 and can be congured
in a range from 1 - 197 Mbps. If the system contains several U 262 Gateways, a packet ID can
be allocated to distinguish the test signals.
7 Configuring the input multiplexer
Clicking on the „Input Mux“ submenu takes you to the input multiplexer settings. It is possible to
assign one ASI input stream to different IP TX. It is not possible to assign several ASI streams
to one IP TX (no multiplexing of IP multicast groups out of several ASI streams). The U 262 has
16 ASI inputs which can be used - depending on licensing - to convert a maximum of 16 IP data
streams.
Figure 8: Conguring the input multiplexer
11
User Guide
U 262