Coast to Coast Distribution With over 40 years of experience importing goods into the domestic automotive aftermarket, Astro Pneumatic Tool Company offers several product categories for one-stop shopping. Here at Astro, we understand the importance of adapting to the demands of an ever-evolving marketplace by providing a continuous stream of new and innovative products in addition to covering the wide breadth of popular industry classics.
Category Reference 6..... Air Tools 48... Paint & Body 69... Hydraulics 78... Undercar 98..
Table of Contents Air Tools Ratchets 3/8” & 1/4” ....................................................6 Impacts ............................................................................9 Drill Motors .................................................................1 3 Air Fasteners ................................................................1 4 Die Grinder Kits .........................................................1 6 Die Grinders ................................................................
Table of Contents Hydraulics Lifting Floor Jacks ........................................................7 1 Floor Jacks and Air Over Jack ..................................7 3 Air/Manual Bottle Jacks..............................................7 4 Transmission Jacks ......................................................7 5 Hydraulic Press and Transverse Bar ........................7 6 Under Hoist Stands ....................................................7 7 Undercar Kits Brake ..........................
Air Tools Section Reference Ratchets 3/8” & 1/4” ....................................................6 Impacts ............................................................................9 Drill Motors .................................................................13 Air Fasteners ................................................................14 Die Grinder Kits .........................................................16 Die Grinders ................................................................
6 AIR TOOLS RATCHETS 3/8" & 1/4" 1111 1/4" Palm Ratchet Wrench • Ultra compact and lightweight SPECIFICATIONS • Ideal tool for confined working areas, such as under dashboard work Square Drive: Free Speed: Overall Length: Net Weight: Max. Torque: Bolt Capacity: Air Inlet Thread: Air Hose I.D. Size: Avg. Air Consumption: Air Pressure: • Ergonomic design blue composite body 1/4" 240rpm 5-1/2" 1-1/10lbs.(0.48kg.) 16ft./lbs.
AIR TOOLS C REA S LES N TIO 7 1143 • Revolutionary Impact Ratchet Wrench with a unique reactionless impact mechanism which absorbs kickback and thereby prevents operator’s wrist from fatigue and/or injury • “Precision Forged” ratchet yoke made of Cr-Mo alloy steel with optimized heat treatment to maintain peak performance and prevent “spreading” which makes other air ratchet lose power • Tease throttle provides very smooth variable speed control • Forward/ Reverse selector with safety lock to prevent
8 AIR TOOLS RATCHETS 3/8" & 1/4" 1119 E BBL O W IVE DR 3/8" Drive Mini Wobble Air Ratchet • Ideal for use on hard to reach places. • Wobble drive provides added flexibility to access hard to reach areas • Compact and lightweight • Ideal tool for confined working areas such as under dashboard work • Ergonomically designed black composite body SPECIFICATIONS Square Drive: Free Speed: Overall Length: Net Weight: Max. Torque: Bolt Capacity: Air Inlet Thread: Air Hose I.D. Size: Avg.
AIR TOOLS 1/4" Pistol Grip Impact Wrench - 40ft./lb.Torque (Patent #327,830) 9 826 • 1/4” anvil is ideal for carburetor use, under dashboard and other tight spots • Designed for quick fastening applications • Patent #327,830 SPECIFICATIONS 1/4" 10,000rpm 4-7/8" (124mm) 1-3/8lbs. (.63kg) 40ft./lbs. 1/4" (6mm) 1/4" 3/8" (10mm) 4cfm 90-120psi 3/8" Snub-nose Impact Wrench - 75ft./lb.
10 AIR TOOLS 1873 3/8" Composite Impact Wrench IMPACTS • 3/8" impact wrench delivers one of the best power-toweight ratios in its class • Composite housing is extremely comfortable, very durable but is one of the lightest and quietest impact wrenches available • Aluminum hammer case is reinforced with high tensile strength steel • Bias motor design provides maximum torque output in reverse • Handle exhaust directs air away from the operator and work area • Teasing trigger provides smooth variable speed
AIR TOOLS 11 157 3/4" Heavy Duty Impact Wrench with 2" Anvil (800 ft lb.Torque) • Durable twin hammer impact mechanism • Anvil and rotor made of a special alloyed steel that is heat treated to prevent chipping or breaking • Steel hammer case provides maximum protection • Two piece construction for easy maintenance • Pressure feed lubrication system SPECIFICATIONS 3/4" 4,800rpm 9.5” (243mm) 10.6lbs. (4.8kg) 800ft./lbs. 1-1/16” (27mm) 1/4" 3/8" (10mm) 7.
12 AIR TOOLS 1868 (2" Anvil) 1869 (6" Anvil) 1869 6" Anvil IMPACTS 1" Heavy Duty Air Impact Wrench • Ideal for tire work on trucks, buses and off-road farm equipment • "Pin-less" impact mechanism maximizes striking force with low vibration • 6" anvil makes tool perfect for the demanding world of truck tire service • High efficiency 6-vane air motor • Six-position power management/regulator (3 forward & 3 reverse) • Air Inlet with 45 degree angle • Air Exhaust - Upward (away from work) • Swept-back sid
AIR TOOLS 3/8" Reversible Air Drill • Lightweight, compact size • One hand reverse lever • Built-in muffler for noise reduction • Planetary gear system for long life • Ergonomic rubber handle • Handle exhaust system 13 525C SPECIFICATIONS 3/8" 1,800rpm 7-7/8" (200mm) 2-1/2lbs. (1.
14 AIR TOOLS 800T 1/4" Straight Type Screwdriver - Internal Clutch • Reversible internal adjustable clutch and tension springs included • Hanger handle • Lightweight AIR FASTENERS SPECIFICATIONS 4.5mm 4mm 3.2mm Tension springs 810T Retainer Capacity: Free Speed: Overall Length: Net Weight: Torque Range: Air Inlet Thread NPT: Air Hose I.D. Size: Avg. Air Consumption: Air Pressure: 1/4" Hex 1,800rpm 10-1/2" (257mm) 2-3/4lbs. (1.3kg) 45-115in./lbs.
15
16 AIR TOOLS 219 219 DIE GRINDER KITS includes - 204 - 201 - 2181 3 Pc. Die Grinder Kit with 1/4" 90° Angle Die Grinder , 1/4" Mini Die Grinder and 8pc.
AIR TOOLS LAR PU S O T P DER OS N 2 M E GRI KIT DI ONE IN 204 222 222 202 includes -204 -202 202 - Composite Body 1/4" Medium Die Grinder Rear Exhaust - 22,000rpm • Composite handle reduces vibration • Rib textured handle provides a firm grip • Lever throttle for feathering control • Compact and lightweight • Rear exhaust • Built-in regulator SPECIFICATIONS 204 202 Collet Size: Free Speed: Overall Length: Net Weight: Motor: Air Inlet Thread NPT: Air Hose I.D. Size: Avg.
18 AIR TOOLS 1220 1240 DIE GRINDER KITS includes -1240 Complete Surface Prep Kit with Composite Handle 90° Angle Die Grinder (1240) & Surface Prep Pads • Ideal for cleaning and polishing engine heads and detail sanding • Patent #5,332,098 • Weight: 3 lbs. • Kit Includes: 1 - 1/4" 90° Angle Die Grinder with Composite Handle (#1240) 5 - 2" Surface Prep Pads with Holder 5 - 3" Surface Prep Pads with Holder 1 - Spanner Wrench 1 - 1/8" Collet 10pc.
AIR TOOLS TH WI EL IV SW FLER F MU • Composite handle reduces vibration • Rib textured handle provides a firm grip • Lever throttle for feathering control • Compact and lightweight • Rear exhaust • Built-in regulator 204 SPECIFICATIONS Collet Size: Free Speed: Overall Length: Net Weight: Motor: Air Inlet Thread NPT: Air Hose I.D. Size: Avg. Air Consumption: Air Pressure: 1/4" 20,000rpm 6-3/4” (171mm) 1.2lbs. (.
20 AIR TOOLS T210 SE NE S A P JA RING BEA accessory - 200-283 200-283 1/4" Medium Die Grinder - Japanese Bearings 22,000rpm - Rear Exhaust DIE GRINDERS SPECIFICATIONS • Positive grip - 1/4" capacity collet chuck • Compact and lightweight • Safety lever • Lever throttle for feathering control • Rib textured handle provides a firm grip • Rear exhaust air flow system directs air away from work surface • Accessory: #200-283 - 3 Slot 1/4" - 1/8" Collect Reducer Square Drive: Free Speed: Overall Length: N
AIR TOOLS 21 216 • Extended shaft provides access for hard to reach places • High speed • Positive grip body for easy control • All ball bearing construction for long tool life • Lever throttle for positive speed control • Rear exhaust air flow system SPECIFICATIONS Collet Size: Free Speed: Overall Length: Net Weight: Motor: Air Inlet Thread NPT: Air Hose I.D. Size: Avg. Air Consumption: Air Pressure: 1/4" 22,000rpm 10" (254mm) 1.2lbs. (.
22 AIR TOOLS Tire Buffer with 2500rpm with Hose, Adapter & Rasp 235B • For Inner liner Buffering, Reaming and Drilling • Includes 36 Grit Rasp, Rear Exhaust muffler and Whip Hose • Low speed buffer with 7/16" hex quick change chuck TIRE BUFFER AND BURR SETS SPECIFICATIONS #3059TB01 Tungsten Carbide Buffing Wheel 2181 Horse Power: Free Speed: Min. Air Hose Size: Avg.
AIR TOOLS Air Belt Sander (20x520mm) with 2 Belts ( #80 & #100) • Increase pulley space for new thicker belts • Non-slip handle grip • Variable speed control • Accessories: #30351 80 Grit Sanding Belt 10 pc #30352 100 Grit Sanding Belt 10 pc TH WI 23 3035 RKS WO NEW ELTS B ER ICK TH SPECIFICATIONS 20mm x 520mm 16,000rpm 16.9" (430mm) 3.08lbs. (1.4kg) 3/8" x 1.
24 AIR TOOLS 249 7” Angle Head Sander - 4,000rpm • Low air consumption • Ideal for both light and heavy applications • Automatic throttle release • Ball bearing construction for longer life • Dead handle and spindle wrench included SPECIFICATIONS SANDERS & POLISHERS Pad Size: Free Speed: Overall Length: Net Weight: Spindle Thread Size: Air Inlet Thread NPT: Air Hose I.D. Size: Avg. Air Consumption: Air Pressure: 7" 4,000rpm 13-1/2" (345mm) 4lbs. (1.8kg) 5/8"/M14 1/4" 3/8" (10mm) 3.8cfm 90psi (6.
AIR TOOLS 5" High Speed Sander /Grinder • High speed, vibration-free performance • Lightweight pistol grip design offers greater control and comfort • Built-in regulator for positive speed control • Direct drive motor with handle exhaust • Includes 3" and 4-1/4" phenolic backing pad and hub wrench 25 222S SPECIFICATIONS 3", 4-1/4" 18,000rpm 5-3/4" (146mm) 2-1/2lbs. (1.
26 AIR TOOLS 888C Dual Piston Straight Line Sander SANDERS • Used on plastic fillers at any stage of hardening • Feathers with ease and smoothness • Dual piston provides efficient power and prevents stalling • Two handle design for comfortable operation • 1" Stroke SPECIFICATIONS Pad Size: Free Speed: Overall Length: Net Weight: Air Inlet Thread NPT: Air Hose I.D. Size: Avg. Air Consumption: Air Pressure: 2-3/4" x 15-3/4" 2,400 strokes per min. 16" (406mm) 6-1/2lbs. (2.
AIR TOOLS 3022S 6" Finishing Palm Sander - 3/16" Stroke w/ PSA pad • Sealed Bearings for Extended Life • 3/16" (5mm) stroke finish • Super lightweight (1.5lbs.) and compact for minimum operator fatigue • Built-in speed regulator • Low noise and vibration design • Accessories: #4606 - 6" PU Velcro Backing Pad #4608 - 6" PSA Backing Pad 3022SV w/ velco pad accessory -4606 -4608 SPECIFICATIONS LED SEA BLE NGS - E U DO EARI D LIF B DE EN EXT 6" 10,000rpm 6" (15.24cm) 1.5lbs. (.
28 AIR TOOLS 3057 RE MO ER FUL G LAR WER PO OTOR M 3” Air Composite Random Orbital Sander Kit • Tool is ideal for metal surface prep, smoothing welds, removing rust, etc.
AIR TOOLS 3" Air Composite Polisher Kit RE MO R E G UL LAR WERF PO OTOR M 3056 MINI POLISHER KITS • Compact lightweight tool permits polishing in hard to reach areas • Ergonomically designed pistol grip handle provides extra control of movement and user comfort • Composite body is durable and helps resist chemicals • Kit includes: 1- 3” Air Composite Polisher (#3056A) 1- 3” Hook & Loop Backing Pad (#20302P) 1- 3.5” Foam Compounding Pad – White (#4638) 1- 3.5” Foam Compounding Pad – Yellow (#4635) 1- 3.
AIR TOOLS SANDING PADS 30 4635 6" High Contour Pads 4600 Yellow Heavy - Cut (Velcro) 4636 4601 Blue Med.
AIR TOOLS 31 930 Heavy Duty Air Sabre Saw - 9,000 Strokes per Minute accessory -5SAW -5SAWR with 5pc 24 Teeth per Inch Saw Blades • Ideal for body shop repair, muffler and exhaust work • Adjustable blade guide increases blade life • Cuts all types of aluminum, plastic, fiberglass and sheet metal • Cuts intricate shapes and tight radius curves on flat and curved surfaces SPECIFICATIONS Cutting Capacity: 5SAW 5SAW - 5pc.
32 AIR TOOLS 208 3" Cut-off Tool • Positive control and lock-out throttle protection • Adjustable Rear Exhaust • Safety throttle lever • Built-in power regulator • Direct drive motor • Graduated trigger • Metal guard CUT-OFF TOOLS SPECIFICATIONS Wheel Size: Free Speed: Overall Length: Net Weight: Air Inlet Thread NPT: Air Hose I.D. Size: Avg. Air Consumption: Air Pressure: by 209 E LIN IN- IDES E L OV IQU UN GN PR NTRO O I DES TER C EA GR 3" 20,000rpm 7" (180mm) 1-3/4lbs. (.
AIR TOOLS Air Scraper Kit - Includes 4 Specialty Blades • • • • • 33 1750K Removes gaskets, paint, rust and other materials Removes undercoating, seam sealers, etc. Built-in regulator Blow molded case for easy storage and transport Blades included: #17501 - 1.77" Wide Blade for 1750 #17502 - 1.75" L-Shaped Blade for 1750 #17503 - 1" Wide 45° Blade for 1750 #17504 - 1" Wide Blade for 1750 SPECIFICATIONS 4,500bpm 1/4" 3/8" (10mm) 90psi 2" (50.8mm) 3cfm 93dBA 9 m/s² 2 lbs. 3lbs.
34 AIR TOOLS 4335 General Duty Air Hammer with 4pc Chisels - 190mm • • • • Handle Exhaust with Deflector Variable Speed Trigger Variable Speed Control Air Regulator AIR HAMMERS SPECIFICATIONS Chisel Shank Opening: Bore Diameter: Stroke Length: Blow Per Minute: Average Air Consumption: Net Weight: Minimum Hose Size: Vibration: .4" (10.2mm) 3/4" (19mm) 2-5/16" (58mm) 3000 BPM 3 CFM 4.18bs (1.
AIR TOOLS Pistol Grip Punch/ Flange Tool - 5.5mm Punch (605PT) - 8mm Punch (608PT) 605PT 608PT 605PT 608PT Punch Capacity: Piston Stroke: Overall Length: Net Weight: Air Inlet Thread NPT: Air Hose I.D. Size: Avg. Air Consumption: Air Pressure: 5.5mm (7/32") 5/32" (4mm) 7.87" (200mm) 2.47lbs. (1.12kg) 1/4" 3/8" (10mm) 4cfm 90-120psi 8mm (5/16") 5/32" (4mm) 7.87" (200mm) 2.47lbs. (1.
36 AIR TOOLS 1756 1757 accessory -1720 -1721 -3000 -3SB10 SPOT WELD CUTTERS 1720 - 6.5mm Drill Bit 1721 - 8mm Drill Bit Air Spot Drill Kit with 5.
37
38 36 AIR TOOLS With Instructional DVD WWW.YOUTUBE.
AIR TOOLS 39 DS2000 Door Skin Removal Tool Pneumatic Door Skin Removal Tool • Patented DS2000 was designed to remove door skins clean and effortlessly • Strong enough to cut through adhesives and even spot welds • Saves significant time and cost in skinning doors - faster than any other method • One hand operation FEATURES OF THE DS2000 • Precision machined aluminum body components, hardened shafts, and ball baring construction throughout.
40 40
AIR TOOLS 232 (Rubber Sleeve) (Aluminum Handle) 32 400E 400E6 Accessory: -400E-AR 400E 400E 533ET 203 #232 Pinstripe Removal Kit #32 Pinstripe Removal Kit Pinstripe Removal Kit - 4,000rpm • Specialty tool developed for the removal of pinstripes, adhesives, double faced tapes and moldings with ASTRO'S Smart Eraser® Pads. • Tool includes built-in regulator • 4,000 Max.
42 AIR TOOLS WINDSHIELD REMOVAL TOOLS WINDKO by Air Windshield Remover with 3pc.
AIR TOOLS 1760 Air Windshield Removal/Install Kit • • • • • • Sealant cutter that cuts around bonded and encapsulated glass Efficiently cleans and smooths moldings after glass removal Teasing throttle and regulator for easy speed control Flexible blade mount can be positioned in 12 different ways Dual suction cups for handling the glass Ratchet tie downs to apply pressure during the install Kit Includes: 1 - WINDKO Air Windshield Remover 3 - Blades: 1 - WINDK-08E 57m Bent Blade 1 - WINDK-08H 52mm Bent Cur
44 AIR TOOLS PR14 Air Riveter - 3/32", 1/8", 5/32", 3/16" and 1/4" Capacity RIVETERS • Includes the following nosepieces: 1/4”(6.4mm), 3/16"(4.8mm), 5/32"(4mm), 1/8"(3.2mm), 3/32"(2.
AIR TOOLS 45 1715 1716 1717 1718 BLOW GUNS 1715 13" 1716 20" 1718 1717 4" 4" Deluxe Air Blow Gun with Angled Nozzle and 1/2" Removable Rubber Tip • New and improved valve design makes this blow gun more convenient, faster, and easier to use for all applications Item # • Comfortable lever control and insulated handle • Ergonomic grip 1715 • High impact plastic body with built-in hanger slot 1716 • Angled Nozzle easily gets into tight places 1717 • Brass air inlet 1718 • Air Inlet Thread NPT: 1/4" •
46 AIR TOOLS 2615 3/8" Air Filter/Regulator with Gauge AIR ACCESSORIES & DELIVERY SYSTEMS • Prevents costly damage to air tools caused by rust, scale and moisture • Convenient minimum installation time into your compressed air system • Efficiently traps moisture while passing through clean, dry compressed air • Gauge has rugged polycarbonate case with 2" face • 1/4" or 3/8" NPT with Max 135psi • 9-2/5" (L) x 2-2/5" (W) • Weight: 2.40lbs.
AIR TOOLS Universal Quick Coupler with Safety Lock, Air Regulator and Pressure Release (Metal Internal Parts) TAL ME NAL ER INT RTS PA 47 2640 • Universal - fits 95% of the fittings in the automotive industry AIR ACCESSORIES • Built in regulator - regulates the flow of air up to 85cfm • Safety lock - will not release the fitting until you unlock it • Pressure release valve - releases air pressure at the tool side when you unlock the coupler - no whiplash when disconnecting tools 3 Way Air Swivel 3SB
Paint & Body Section Reference Siphon Feed Spray Guns ....................................5 0 High Efficiency and HVLP Spray Guns ............5 1 HVLP and LVLP Spray Guns..............................5 2 Thermo-Tec Spray Guns....................................5 3 HVLP Spray Guns ................................................5 4 Spray Guns and Remote Systems ....................5 5 Replacement Cups ..............................................5 6 Spray Gun Accessories.....................................
50 PAINT & BODY Touch Up Gun with Cup AS6S • Ideal for shading and spotting • Self-centering brass air nozzle with adjustable spray pattern • Stainless steel needle and fluid tip • 8 oz. (236cc) aluminum siphon cup • Accessory: #AS6SCUP - Cup Assembly SIPHON FEED SPRAY GUNS SPECIFICATIONS AS6SCUP AS7SP Nozzle Size: Operation Pressure: Net Weight: Dimensions W x H: Avg. Air Consumption: Air Inlet Thread NPT: Required Compressor: Max. Pattern at 8" Distance: Fluid Inlet Thread NPT: Air Hose I.D.
PAINT & BODY EUROHE103 EUROHE105 EUROHE107 51 EUROHE109 (1.3mm Nozzle Size) (1.5mm Nozzle Size) (1.7mm Nozzle Size) (1.
52 PAINT & BODY EUROHVT8 EUROHVT1 EUROHVT12 (0.8mm Nozzle Size) (1.0mm Nozzle Size) (1.2mm Nozzle Size) EuroPro Forged HVLP Touch Up Gun with Plastic Cup Works with disposable cups systems ITH R O SW HVLP & LVLP SPRAY GUNS RK NE DURABLE & LIGHTWEIGHT WO RBOR SED BA TE • Forged body provides longer tool life WA VENT T L N SO • Anodized body for corrosion protection PAI • Internal coated passages • Stainless steel needle and fluid tip • Lightweight: 285 grams (0.
53 Great for Waterborne Base SPECIFICATIONS Great for Waterborne Primers Cup Capacity: Nozzle Size: Work Pressure: Net Weight: Dimensions W x H: Max working pressure: 600ml 1.3mm,1.7mm 5 to 8 bar (72.5 to 116 psi) 1.1lbs.
54 PAINT & BODY HT104 (1.4mm Nozzle) HT108 (1.8mm Nozzle) HVLP SPRAY GUNS TH R WI KS NE O R WO RBOR SED BA TE WA VENT T L N SO PAI HVLP Spray Gun • Designed and constructed for professional users • Strict Testing and inspection given to each gun ensures high-level service • HVLP unit provides perfect flow with a transfer efficiency over 65% and a saving in fumes and paint up to 20% compared to traditional models • Multiple-hole, high atomization cap.
PAINT & BODY 2 Quart Pressure Pot Kit SPECIFICATIONS 2PG7S 2PG8S Nozzle Size: Working Air Pressure: Ideal Air Pressure: Enamels: Lacquers: Net Weight: Dimensions W x H: Avg. Air Consumption: Air Inlet Thread NPT: Fluid Inlet Thread NPT: Required Compressor: 1.2mm 0-60psi 0-20psi 10psi 5psi 4.41lbs. (2kg) 5" x 17" 7cfm 1/4" 3/8" 3hp 1.7mm 0-60psi 0-20psi 10psi 5psi 4.41lbs.
56 PAINT & BODY REPLACEMENT CUPS SPRAY GUN CUP CHART 354006 Aluminum Gravity Feed Cup 600ml Capacity AS6SCUP Aluminum Siphon Feed Cup 8oz. Capacity CUPS1 Aluminum Siphon Feed Cup 1qt.
PAINT & BODY 2pc. Gravity Feed Spray Gun with Removable Strainer Holder 57 GFH1000 • 2pc.
58 PAINT & BODY 4535W SPRAY GUN WASHER & SHAKER TH R WI KS NE O R WO RBOR SED BA TE WA VENT UNS L G SO RAY SP Hurri-Clean Pump-less Waterborne & Solvent Based Paint Spray Gun Washer Patented • Designed for use with waterborne or solvent based paints spray guns • Patented pump-less unit eliminates major problem of other units • 2.
PAINT & BODY Air Control Unit - 120cfm Capacity 59 2618 • Filter and regulator in one • Easy to install for light to medium industrial and automotive applications • Removes water, oil and contaminants (down to 5μm) from compressed air, and provides constant air supply • Improves performance and useful life of air-tools • Easy reusable/replaceable in-line filter • Strong Aluminum housing for extensive use • Drain valve empties filters without disassembling the unit.
60 PAINT & BODY MM18 18" Masking Machine MASKING MACHINES • Includes bars for two (2) paper rolls and four (4) tape rolls • Large adjustable washers maintain paper alignment • Wing nuts for easier paper loading • Sharp, anodized blade for smooth cutting • Large storage tray on bottom for tools • Sandpaper tray on side and bar for holding spray gun • Weight: 29 lbs.
PAINT & BODY 61 7300 Universal Super Stand • Accommodates any panel, fender, door, hood, or bumper which makes repairs and refinishing easy • Includes 8 adjustable bars to fit almost any panel securely • Portability allows for fast and easy moving of the part from the prep station to the spray booth • Single handed rotation of panels 350 degrees in 16 degree increments • Weight capacity: 200lbs • Weight: 52lbs.
62 PAINT & BODY UCG100 Air Under Coating Gun • Applies undercoat, gravel guard or sprayable bed liners • Applies a top quality finish undercoat to vehicles to fight rust and stone chips • Applies all popular brands of undercoat of any viscosity • Quick disassembly for faster cleanups • Solid aluminum construction BODY REPAIR EQUIPMENT SPECIFICATIONS Air Inlet Thread NPT: Avg. Air Consumption: Air Pressure: Net Weight: 4538 1/4" 6-12cfm 40psi 1.
PAINT & BODY 63 4586 12" Bamboo Paint Paddles • 1,000 pieces per case • Stronger than wood and resin free • Kilned dried • Case Weight: 26lbs. (Fine) • Filters imperfections in paints & varnishes • 190 Microns • 1000 pieces per case (250 per sleeve) • Full flow tip • Case Weight: 13lbs.
64 PAINT & BODY 9004 Canvas Wheel Masker Set PAINTING ACCESSORIES • 4 pieces per set • Ideal for protecting wheels and tires from overspray • Set of 4 per package • Up to 15" capacity • Weight: 2.55lbs.
PAINT & BODY 5pc. Fastener & Molding Remover Set 65 4505 • Set includes 5 distinctive tools for easy removal of fastener, molding, wheel hubs, etc. • For use on internal and external vehicle molding and trim fasteners • Plastic construction of tools prevents scratching and damage to vehicle paint, leather, chrome, etc. PAINTING ACCESSORIES 11pc. Auto Fastener & Molding Removal Tool Set • Set includes 11 distinctive tools for easy removal of fastener, molding, wheel hubs, etc.
66 PAINT & BODY 4650 (PSA) 4651 HAND SANDING BLOCKS (Velcro) 4654 (Velcro) 5" x 2-3/4" Hand Sanding Block • Molded Rectangle Soft Hand Pad • Ergonomically designed • Soft foam material for comfortable grip • For use with 2-3/4" x 5" (70x125mm) abrasive 5-1/2" x 2-1/2" Velcro Hand Sanding Block • Molded Rectangle Hand Pad • Ergonomic design • Velcro face • Soft foam material for comfortable grip • For use with 2.5" x 5.
PAINT & BODY 4652 8" x 2-3/4" Hand Sanding Block (PSA) • Molded Rectangle Hand Pad for flat sanding • Ergonomic design • Soft foam material for comfortable grip • For use with 2-3/4" x 8" (70x200mm) abrasive 4653 (Velcro) (5" x 2-3/4") ARSB9 • Specially designed holding slot grips sandpaper firmly to reduce slipping and tearing • Easy-to-hold, soft, sanding block body material stays comfortable in the hand • Uses a 1/4 sheet of sand paper • #ARSB5 is 5" x 2-3/4" • #ARSB9 is 9" x 2-3/4" (9" x 2-3/4"
PAINT & BODY 68 BODY & FRAME 107EX 4 Ton Capacity Portable Power Kit • • • • • “Quick-lock” design for fast and easy assembly and disassembly Long handle provides ease of pumping Thick wall extension tubes provide added strength and longer life Flexible hydraulic hose with spring guards at both ends Kit Includes: - Storage Case - Hydraulic Hand Pump - Hose with Male 1/4" NPT Fittings and Male Coupler - 4 Ton Hydraulic Ram with Female Coupler - Flex Head - Flat Base - Serrated Saddle - Wedge Head ANSI
Hydraulics Section Reference Lifting Floor Jacks ................................................7 1 Floor Jacks and Air Over Jack ..........................7 3 Air/Manual Bottle Jacks......................................7 4 Transmission Jacks ..............................................7 5 Hydraulic Press and Transverse Bar ................7 6 Under Hoist Stands ............................................
HYDRAULICS 2 Ton Double Plunger Low Profile Service Jack 71 200LP • Very low pick up point of 2-3/4" • Double plunger • Only 8-9 pumps to full height • Quick pump • Overload protection ANSI MEETS ANSI STANDARD FOR PERFORMANCE AND SAFETY SPECIFICATIONS 2-3/4" (70mm) 19-5/8" (495mm) 26-3/8" (670mm) 56" (1420mm) 5-1/2" (142mm) 4-3/4" (120mm) 91lbs.
72 HYDRAULICS 500EX 5 Ton Capacity Hydraulic Floor Jack • • • • Constructed of rugged steel All metal casters Long, low design enables the user to get into low work areas Designed for heavy duty shop applications ANSI MEETS ANSI STANDARD FOR PERFORMANCE AND SAFETY SPECIFICATIONS LIFTING FLOOR JACKS Weight Capacity: Min. Saddle Height: Max. Saddle Height: Hydraulic Lift: Chassis Length: Chassis Width: Handle Length: Frame Height: Saddle Diameter: Net Weight: 1000EX 5 Ton (11,000 lbs.
HYDRAULICS 20 Ton Capacity Hydraulic Floor Jack 73 2000EX • • • • • Welded base and cylinders to assure strength and eliminated leaks Chromed pump piston and ram for added rust resistance Self-retracting Foot pedal brings saddle up to load quickly Quick pump design for lifting without load from bottom to top within 13 strokes • Meets ANS/ASME PALD Standards & CE/GS ANSI MEETS ANSI STANDARD FOR PERFORMANCE AND SAFETY FLOOR JACK & AIR OVER JACK SPECIFICATIONS Weight Capacity: Min. Saddle Height: Max.
74 HYDRAULICS AIR/MANUAL BOTTLE JACKS 5302 20 Ton Air/Manual Bottle Jack • Designed for operating manual or pneumatic operation • Air hose can swivel in any direction of connection from air source • Fitted with a safety valve against overloading • 3 piece long handle allows ease of pumping • Extension screw gives added height when necessary • Speedy and versatile, air/hydraulic bottle jack is far quicker than using conventional hand operated hydraulic equipment safer (since air power permits one-handed
HYDRAULICS 1/2 Ton Capacity Telescoping Transmission Jack 75 500H • Ideal for under hoist use • Fully adjustable universal saddle with corner brackets and safety chain for alignment of bolt patterns • Foot operated pump and lowering pedals allow use of both hands to position and align saddle with transmission • Flash chromed ram prevents rust from entering the hydraulic system • Safety overload system prevents jack use beyond its rated capacity • Large handle to maneuver jack • Wide base adds stability A
76 HYDRAULICS HYDRAULIC PRESS & TRANSVERSE BAR TS22 Hydraulic Press - 20 Ton Capacity • Heavy duty return springs for fast ram retraction • Reinforced head plate • Arbor plates included • Safety bypass valve assures unit will not exceed rated capacity ANSI MEETS ANSI STANDARD FOR PERFORMANCE AND SAFETY SPECIFICATIONS Weight Capacity: Overall Height: Base Width: Stroke: Press Bed Width: Net Weight: 5820 Engine Transverse Bar with Support Arm • Makes removal of transaxle easy by supporting engine of f
HYDRAULICS 2 Ton Under Hoist Tripod Stand 77 1102 • Ideal for supporting vehicle components under the vehicle • All steel construction for added strength • Adjustable pin chained to the stand secures the support column at 6 different height positions • Quick adjust spin handle with thrust bearing eliminates wear and provides ease of turning under load • 1-1/4” diameter acme threaded screw has 6-1/4” of travel for fine adjustment • 5/8” thick rubber saddle pad • Wide base design for load stability ANSI M
Undercar Kits Section Reference Brake ......................................................................8 0 Cooling System ....................................................8 1 Drive Train ............................................................8 4 Electrical System .................................................8 5 Engine.....................................................................8 6 Fuel System...........................................................8 7 Running Gear ................
80 UNDERCAR KITS 7848 8pc. Professional Brake Tool Set • Set includes 1- Blow Molded Case for easy storage and transport Description Spring Compressor Brake Spring Installer Spring Removal Tool Brake Retaining Spring Tool Brake Spring Pliers Brake Adjustment Spoons BRAKE Mini Adjustment Spoon 7860 Qty. 1 1 1 1 1 2 1 11pc.
UNDER CAR KITS Universal Radiator Pressure Tester & Vacuum Type Cooling System Kit D AN E RG LL PU REFI 81 78585 •Special design of vacuum purge & refill tool connection fits nearly all type of radiator openings •Allows for easy testing for leakage in radiator system and quick change of coolant • Applications: Mercedes Benz, GM, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishi, Nissan, Mazda, Toyota, Infiniti, Geo, Suzuki, Isuzu, Honda, Lexus,Volvo, Saab, Citroen, Renault, Fiat, Alfa, Mini Cooper,VW,
82 UNDERCAR KITS COOLING SYSTEM 7895 Description 10pc. Fan Clutch Wrench Set • Allows you to hold the fan clutch with the clutch holder tool, while using the special wrench to turn the fan clutch nut • Square drive allows attachment of a breaker bar for extra torque • A must for any front engine service • Works on wide range of Ford, General Motors and Chrysler vehicles • Blow molded case for easy storage and transport • Kit Includes: Qty.
UNDER CAR KITS 83 78625 GM Water Pump Holding Tool 7880 Northstar Water Pump Socket • Used to remove and install the water pump on Cadillac Northstar 4.6 liter V-8 engines 1993 and later Oldsmobile Aurora 4.
84 UNDERCAR KITS DRIVE TRAIN 78205 Universal Steering Knuckle Spreader Tool • Spreads lower ball joint clamp preventing damage to knuckle that may be caused by using other removal methods • This tool is adjustable and suitable for steering knuckles with either a centralized slot or non-centralized slot • Suitable for clamping bores on Audi, BMW, Citroen, Ford, Peugeot, Renault, Seat, Skoda,VW and many Japanese vehicles • Made of durable Chrome-Moly steel for added strength 7824 Bearing Race and Seal D
UNDER CAR KITS 7pc.
86 UNDERCAR KITS ENGINE 7846 Harmonic Balancer Puller Set • Designed for use on harmonic balancers, crankshaft pulleys, steering wheels and gear pulleys • Can be used on tapped flywheels of electric or two-cycle motors • Heavy duty 4-way slotted yoke • 3 - Hardened forcing screws 3-3/4” & 6-1/2” long • Blow molded case for easy storage and transport • 11 sets of washer head bolts: Description 1/4”-28 UNF x 3” 5/16”-18 UNC x 2” 5/16”-18 UNC x 4-1/2” 5/16”-24 UNF x 3-1/2” 3/8”-16 UNC x 4” 3/8”-24 UNF x 2
UNDER CAR KITS Master Disconnect Set Kit 87 78930 • A complete set of disconnect tools stored in a handy blow-molded case Fuel & Transmission Line Disconnect Set • • • • • • • • FUEL SYSTEM • • • • • Anodized aluminum Separate fittings on fuel lines, fuel filters & fuel tank return lines Sizes: 1/4”, 5/16”, 3/8” & 1/2” Oil Cooler Line Disconnect Tool Separates automatic transmission oil cooler lines on Ford Taurus and Escort with AXOD and ATX transmissions Fuel line disconnect tool allows damage fre
88 UNDERCAR KITS RUNNING GEAR 7897 Ball Joint Service Tool and Master Adapter Set • Removes and replaces ball joints • C frame press alone can be used to remove and replace universal joints • Set includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles through 1997 • Also included is the #2030-1 live center forcing screw plug • Blow molded case for easy
UNDER CAR KITS 89 7874 RUNNING GEAR Pulley Puller and Installer Kit • Removes pressed-on alternator and power steering pulleys on late model GM, Ford and Chrysler engines • Installs late model GM alternator and power steering pulleys including Quad 4 • Blow molded case for easy storage and transport • Case Dimensions: (L)9” x(W)7-1/4” x(H)2” • Net Weight: 2lbs. (.
UNDERCAR KITS
UNDER CAR KITS Hose Clamp Pliers 9409A • Larger capacity pliers specially designed for trucks • Allows for extra reach, removal and locking of clamps into open position • Allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16" - 3" • Pliers can be locked, freeing up your hands and making your job easier and faster • Double Gear Lock Lever with wider and deeper gears for secure locking • Pliers body has a lifetime warranty • Cable and spring are wearable items and mu
92 UNDERCAR KITS 9406 7pc.
UNDER CAR KITS 93 9481 HOSE REMOVERS Adjustable Style Hose Remover • Specifically designed for removing hoses • Quickly and easily loosens and removes hoses with a simple forward and backward motion without needing screwdrivers and multi-grip pliers • Eliminates torn hoses and damage to plastic couplings • Tool consists of a main body with moving jaw that adjusts to fit hoses with diameter between 24mm to 53mm • Unique designed pins create strong grip which allows hose to be loosened and removed • Knob
TIRE TOOLS 94 UNDERCAR KITS
UNDER CAR KITS 3.5" Digital Tire Inflator with Hose 3018 30DC 3081 Dial Tire Inflator • Aluminum die-casting unit covered with rubber sleeve for extra comfort and durability • Clear and easy to read • 3-in-1 function: inflate, deflate and measure tire pressure • Two position inflate/deflate lever • Increased safety and reduced tire-related incidents • Unit includes a 21" hose • Measuring Range: 0-174psi • Accuracy: 0-58psi +/-1.
96 UNDERCAR KITS SOCKET SETS 7835 5pc. Impact Socket Set - Chrome Protective Plastic Sleeves and Shallow Broach • Features protective sleeves and internal plastic inserts that prevent scratching of wheels and decorative lug nuts • Hollow design creates room for removing longer bolts by pushing out plastic insert • Sizes Include: 17mm, 19mm, 21mm, 13/16" and 7/8" • Blow molded case for easy storage and transport 7870 7pc.
UNDER CAR KITS 3070 Nitrogen Wall Mounted Inflator 3072 • Adjustable over pressure settings (OPS) • Automatic purging programs (N2P) • Vandal resistant mechanical switches • Safe, Accurate and Easy to use • Li battery operation • Power saving auto power off • Large backlit LCD display • Inflate up to 4 tires simultaneously • Ceramic sensor accuracy to: +/0.02Bar/0.3Psi/2kPa/0.02KGF • Unit uses standard Nitrogen bottle or direct Nitrogen air supply from generator or air compressor • Inflation Range: 0.
Shop Equipment Section Reference Riveters ...............................................................100 Nut Riveters .......................................................103 Hose Reels..........................................................104 Welding ...............................................................105 2-in-1 Workbench/Scaffold ..............................107 Shop Carts ..........................................................108 Crimping Tool and Grease Fitting Tools .......
100 SHOP EQUIPMENT 1426 1/4" Heavy Duty Hand Riveter • Extra long handles provide excellent leverage • Includes 5 nosepieces: 1/8", 5/32", 3/16", 7/32", 1/4" • Tool length 20-3/4" RIVETERS 1426FNP - 5-3/4" Extension Nose Piece 1423 TED E N E PAT CTUR U ES STR REAS INC WER PO 1/4" Heavy Duty 13" Hand Riveter • Patented structure increases power and reduces shock • Shortest long arm riveter which can operate up to 1/4" (6.
SHOP EQUIPMENT Hand Riveter with Dial with 4 Size Head - 1/8", 5/32", 3/16" & 1/4" 1420 RIVETERS • This riveter has a dial with 4 sizes which works with 1/8", 5/32", 3/16", and 1/4" rivets • Turn dial to find the correct rivet size needed for the job • Double compound hinges maximize leverage • Ergonomic handle • Plastic container to collect the spent mandrels for safety and ease of disposal • Unique hidden spring design for the return of handles automatically L DIA GES E AN CH EPIEC S NO SIZE Ergonomi
102 SHOP EQUIPMENT 1434 360° Swivel Head Hand Riveter 3/32",1/8",5/32" and 3/16" Nose Sizes Free function head which swivels 360° Grips are molded for comfort and control of the riveter Can be operated from any angle Rivets replace screws, bolts, brazing, soldering and welding Includes 4 nosepieces: 3/32”, 1/8”, 5/32” & 3/16" RIVETERS • • • • • 1435 360° Swivel Head Hand Riveter Kit • • • • • • • Free function head which swivels 360° Grips are molded for comfort and control of the riveter Can be oper
SHOP EQUIPMENT Hand Rivet Nut Kit M5, M6, M8, M10 & M12 103 1427 • Works for rivet nuts in M5 M6 M8 , M10 & M12 sizes in aluminum steel and stainless steel • Hand screw design for loading and unloading the nuts • Ergonomic handle design for user's comfort • Unique hidden spring design for the automatic return of the handles RIVETERS 13" Metric/SAE Hand Rivet Nut Kit with Rivet Nut Assortment • Patented structure increases power and reduces shock • Shorter handle with double compound hinges that maximiz
104 SHOP EQUIPMENT 3688 HOSE REELS 3689 Hose Reel - Automatic Rewind with Hose • 300 psi air hose reel • Automatic rewind • Solid rubber stopper • 4-way directional rollers • 2 position roller bracket assembly • Shipping weight: 55lbs.
SHOP EQUIPMENT Deluxe Solar Auto-Darkening Welding Helmet and 13.
106 SHOP EQUIPMENT 8080 8080 - Complete Oxyacetylene Welding Outfit • UL and UR approved pressure gauge WELDING Comes Complete with: • Torch Handle • Cutting Attachment • Check Valve • Oxygen Regulator • Acetylene Regulator • Nozzle Tips (VM-W 0, 2, 4 • VM-C 0-3-101) • 15' Twin Hose • Sparklighter • Goggles • Tip Cleaners 8202 Universal Welding Cart • Heavy duty steel construction • Heavy duty casters -two 7.5" fixed & two 3" swivel • 3 shelves for easy access to supplies • Cart size: 27.5” (L) x 16.
SHOP EQUIPMENT 107
108 SHOP EQUIPMENT 8330 Heavy Duty Plastic 2 Shelf Utility Cart SHOP CARTS • For shop, office, warehouse or medical facility use • Has two handles on each side • Cart can be pushed or pulled from either side • Trays are 3-1/2" deep and can hold up to 300lbs. • 4" swivel heavy duty casters • Non marking tread • Size: 16"(W) x 30"(L) x 31"(H) • Net Weight: 21lbs. (9.
SHOP EQUIPMENT 7pc Professional Quick Interchangeable Ratchet Crimping Tool Set 9477 QUICK CHANGE JAWS NO TOOL REQUIRED ALSO SOLD SEPARATELY: 9477E6 9477G3 9477H1 RG Type (0.10", 0.213", 0.319", 0.360") (2.54mm, 5.41mm, 8.10mm, 9.
110 SHOP EQUIPMENT 7356 21 Gallon Air Operated Waste Oil Drainer • Suitable to drain waste oil from engines, gear boxes and differentials of most vehicles • Air operated oil drainer with center mounted adjustable collecting bowl • Adjustable collecting bowl height to work with jack lift or servicing cock • Equipped with collecting bowl valve to inspect drained oil before it enters the reservoir • Self evacuating • Warning: Do not use with corrosive or flammable products EVACUATORS F SEL TING A CU A V E
SHOP EQUIPMENT 78270 Self Centering Cone Type Flaring Kit 1/8" - 1-1/4" Tube Cutter • 1/8" – 1-1/4" (4-32mm) tube cutting capacity • Grinding blade uses high quality alloy steel for grinding process • Unique ball bearing design makes cutting easy ING R E LE NT -CE HAND F L SE EW SCR FLARING KIT & TUBE CUTTER • Capable of creating a single lap, 45° angle flare on soft copper, brass, aluminum, and mild steel tubing of 0.75mm - 1.
112 SHOP EQUIPMENT BRUSHES 9020 20pc Wire Brush Set • Set includes 1 piece brush each in stainless steel, brass and nylon in the following sizes: 1/4", 3/8", 1/2", 5/8", 3/4" and 1" • Choice of stainless steel, brass and nylon brushes makes this kit ideal for auto-repairing and polishing • Suitable for polishing and cleaning areas of autos, machines, etc.
101 SHOP EQUIPMENT 113
114 SHOP EQUIPMENT Titanium Step Drill Bit Set (1/8" - 1/2" , 3/16" - 1/2", 1/4" - 3/4") BIT SETS & DRILL/EXTRACTOR 9445 • Self-starting multiple hole sizes • Contains one each of: • 13 Hole Sizes from 1/8" to 1/2" in 1/32” increments • 6 Hole Sizes from 3/16" to 1/2" in 1/16” increments • 9 Hole Sizes from 1/4" to 3/4" in 1/16” increments • All drill bits have a ¼” hex shank for use with drills and quick change chucks 9447 25pc.
SHOP EQUIPMENT 10pc. Snap Ring Pliers Set • • • • • 9401 • Internal/External heavy duty Circlip Pliers Set • Features replaceable points and spring ratchet locking mechanism to securely hold against circlip tension • Tip Diameter: 0.12" (3mm) • Internal = 3-1/16" - 6-1/4" (78mm - 159mm) • External = 3-1/2" - 6-1/2" (89mm - 159mm) • Spread: 3-1/4" (85mm) • Length 16" (400mm) • Tip Size 0.12" (3.
116 SHOP EQUIPMENT MISCELLANEOUS SHOP 7660 101 Electronic Safety Earmuffs • LED power indicator • On/Off switch with volume control • Solid-state circuit • Built-in microphone amplifies low level sound • Eliminates noise over 85db • Comfortable ear cushions and headband • Powered by 2 AA batteries • ANSI approved NRR 21db • CE certificated NRR 23db 7760 Cordless Circuit Tester • This unit does not require ground wire or clip and is safe with ECMs, Sensors, Transducers, Air bags, etc.
117 Polpular Parts Astro's parts are interchangeable with the most popular tools on the market and are guaranteed professional grade quality. Please contact our sales staff at 800-221-9705 for additional information.
Alphabetical Index A Air Accessories .................................................................46 Air Fasteners .....................................................................14 Air Hammers ....................................................................34 Air Regulators and Filters ..............................................59 Air/Manual Bottle Jacks...................................................74 Angle Grinders and Belt Sanders .................................
Model Number Index 1000EX ..................... 72 101 ............................. 10 107EX ....................... 68 108EX ....................... 68 1102 .......................... 77 1111 ............................ 6 1114 ............................ 6 1119 ............................ 8 1139 ............................ 8 1142 ............................ 7 1143 ............................ 7 1175 .......................... 77 1220 .......................... 18 1240 ..........................
Model Number Index 605PT........................ 35 605ST ........................ 35 608PT........................ 35 608ST ........................ 35 7300 .......................... 61 7351 ........................110 7356 ........................110 7445 .......................... 95 7620 .......................... 43 7660 ........................116 7760 ........................116 7801 .......................... 85 7802 .......................... 89 78200 ........................ 82 78205 ............
Sales and Marketing Office 2417 Seaman Avenue South El Monte, CA 91733 Tel: (626) 228-3170 Fax: (626) 228-3124 Fax: (877) 318-2194 Warehouse/Operations 372 Old US Highway 52 South Mt. Airy, NC 27030 (800) 221-9705 USA Toll Free E-mail: astrotools@astrotools.com Website: www. astrotools.
