Manual

SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpre
tation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME DESIO NATION/EXPLANATION
V Volts Voltage
Amperes Current
Hz Hertz Frequency (cycles per second)
Alternating Current
Type of current
Class II Construction Double-insulated construction
Wet Conditions Alert
Do not expose to rain or use in damp locations.
Read The Operator’s Manual
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye Protection
Always wear safety goggles, safety glasses with side shields, or
a full face shield when operating this product.
A
Safety Alert
Precautions that involve your safety.
Ml
Risk of Bursting
Do not adjust regulator to result in output pressure greater than
marked maximum pressure of attachment. Do not use at pressure
greater than the rated maximum pressure of this compressor.
é
Risk of Fire or Explosion
Do not spray flammable liquid in a confined area. Spray area
must be well ventilated. Do not smoke while spraying or spray
where spark or flame is present. Keep compressors as far from
the spraying area as possible, at least 15 feet from the spraying
area and ail explosive vapors.
Risk of Electrical Shock
Hazardous Voltage: Disconnect from power source before ser
vicing. Compressor must be grounded.
Hot Surface
To reduce the risk of injury or damage, avoid contact with any
hot surface.
o
Risk to hearing
Always wear ear protection when using this tool. Failure to do
so may result in hearing loss.
Risk to Breathing
Air obtained directly from the air compressor should never be
used to supply air for human consumption.
6