Troubleshooting guide

SECTION 3

OPERATING THE ASTROJET M1

Ink Usage

Allows you to monitor the estimated amount of

ink left in each of the five Ink Tanks. You can

monitor ink consumption and schedule Tank

changes (saving down-time during a print run.)

NOTE: Ink Usage only works when you start

with a new Ink Tank and leave it in the

Printer.

Ink Estimation Mode – Checking this box lets

you predetermine how much ink a given job may

use prior to printing. This can be useful for

determining per piece costs. The job is sent to the

Printer and loads, but does not print. Once the job

is loaded, the chart shows the amount of ink (by

color) that the job will use.

NOTE: The estimating process will take as

long as the job would take to print (i.e., if the job would take 1 hour to print, the estimate will take 1

hour to display.)

Network Configuration

Permits you to view, enter or change settings to connect the Printer to your network.

Network Connection Set Up:

1. The Printer is still connected to the computer via the

USB cable.

To connect the Printer to a network, open the

Toolbox. On the User Interface page, click

“Network Config.”