Troubleshooting guide

SECTION 3
OPERATING THE ASTROJET M1
28
Using the Printer Toolbox
Once the Printer Driver is installed you have access to the Printer Toolbox. The Toolbox lets you check
printer status, monitor ink usage, perform diagnostic checks, print reports and run maintenance tasks on the
Printer from your computer.
To open the Toolbox:
Open the Start Menu, then click on Toolbox. When the User Interface window opens you will find a
series of Menu Options you can click on at the lower left of the screen. You can check the Printer Status in
the upper left part of the screen.
User Interface
[A] Screen Buttons: Let you perform
maintenance and operating tasks. You can use
the screen buttons to Clear Errors, Cancel a
Job, Reset the Job Counter, and Reset the Page
Counter. You can also:
Replace Ink Tanks – Disconnects Printer
communication with Ink Tank Sensor.
Allows you to safely remove Ink Tanks for
replacement.
Refresh Ink Levels – Used to update or
confirm the ink levels shown at the left of
the screen.
Circulate Ink – Purges air from the lines
and primes the system after replacing the Ink
Tanks or Printhead Cartridge.