Troubleshooting guide

SECTION 3
OPERATING THE ASTROJET M1
26
Using Layout Tab Printing Adjustments
Image Position – You can use the Left Adjustment move the image area away (+) from
the left edge of the media (image moves to the right) You can use the Top Adjustment to
move the image up (-) or down (+) from the top left corner of the media used.
Max Page Width – Lets you set how wide the actual print area will be. NOTE: Can be
no larger than the maximum print width for the printer (8.5"/220.8mm).
Purge Bar Position* – In operation, the Printhead spits a small amount of ink in the gap
between pieces to keep the nozzles refreshed. For irregular-shaped pieces (like an
envelope flap), the sensor may “read” the lower end as the edge and spray on the tip of
the flap instead of the actual gap between pieces. This feature allows you to manually set
the gap to account for the extra length needed to reach the actual gap.
* See also “Purge Bar Position” in the Printer Toolbox section.
 Watermark – Prints a light background watermark in the paper while printing the original
document. When this option is selected the “First page only” option prints the watermark on the
first page, but not subsequent pages, unchecking prints the watermark on all pages. The Custom
button lets you create a new watermark or edit an existing watermark, including font selection,
color, size and printing angle.
 My Print Settings – Access your saved custom print settings for various jobs.