Troubleshooting guide

SECTION 2

INSTALLING THE PRINTER

8. Finished software installation. Do not check the

Print Test Page as the Printer is not set up yet.

You can check the “Set this printer as the default

printer” at this time. Click “Next>”.

9. Install Printer Software. Click “Exit” to close

the CD.

10. Restart the computer to complete the installation.

Install the Ink Tanks

The Printer uses one Printhead Cartridge and five Ink Tanks (two Black, one Cyan, one Magenta, and one

Yellow). Install the Ink Tanks as follows:

1. Open the Printer Toolbox. Go to the

Start Menu and open the “Toolbox”.

You will see System Status information

in the upper left corner of the User

Interface window. Note that the

“CKMYK” boxes are empty.

2. Click “Replace Ink Tanks”. This

disconnects Printer communication

with the Ink Tanks and allows safe

installation and replacement. Once the

“Confirm” screen displays, it is safe to

install the Ink Tanks.

IMPORTANT: DO NOT press

“Continue” until after you have

installed the Ink Tank(s) and closed

the Ink Tank Latches.