Troubleshooting guide

SECTION 2

INSTALLING THE PRINTER

Remove Service Station Transport Tab and Shipping Tape

1. Open the Top Cover.

2. Release the two latches (one on either side of the

Print Engine). Open the top half of the Clamshell by

lifting both levers at the same time.

CAUTION

HOLD ONTO BOTH LATCHES WHEN OPENING AND CLOSING THE PRINT

ENGINE CLAMSHELL TO PREVENT DAMAGE.

DO NOT ALLOW THE CLAMSHELL TO DROP OR SLAM CLOSED.

TO PREVENT DAMAGE TO THE INK LINES, A STOP LIMITS RAISING THE

CLAMSHELL MORE THAN 60°.

3. Remove the cardboard Transport Tab [A]

from the Service Station.

4. Remove the tape [B] securing the Head

Media Guide. (If necessary, wipe off any

tape residue from the Head Media Guide

surface [C].)

5. Carefully close and latch the Upper

Clamshell. Then close the Top Cover.