Service manual

SECTION 3
FUNCTIONAL OPERATION
18
Features Tab
The Features Tab/ Advanced Options depending on the operating system is used to change the speed and
resolution of the Printer, to add a delay to the feed to provide separation between the pieces, and to print and overlay
with the job. The first feature is the Print Quality, which has two settings. One for the Resolution of the print
quality and the second for the appropriate speed. Changing the resolution to a higher number e.g. 200 DPI to 600
DPI will increase the quality of the image. When the resolution is changed, the Belt speed (IPS) is automatically
changed to the optimum speed for the resolution selected. You can, however change the speeds to a lower speed as
follows:
The Feed Delay can be used to put more space between the pieces as they are being printed. This will give the first
piece printed more time to dry before the next piece is printer. The adjustment range is in 0.1-second increments.
This feature works at all speeds.
The Overlay feature is used to save time printing when you are combining a database with fixed information or
graphics. The default is “No overlay”.
Resolution Speeds available
150 DPI Low, Medium, Medium High,
and High
200 DPI Low, Medium, and Medium
High
300 DPI Low, and Medium
600 DPI Low