Troubleshooting guide
SECTION 1
GETTING ACQUAINTED
3
Control Panel
1.
ON LINE key – Indicator lights when data is sent to Printer, printing is ready to begin.
This key also turns Printer offline to access Menu Mode.
2.
- key – In Menu Mode, scrolls to the previous selection.
3.
ENTER key – Starts and stops printing.
4.
FAULT Indicator – Indicator lights when there is a problem with printing process.
5.
RESET key – Resets Printer to “standby” state.
6.
+ key – In Menu Mode, scrolls to the next selection.
7.
MENU key – Used to enter Menu Mode to access operator functions.
8.
TEST PRINT key – Puts Printer in Test Mode and prints a sample copy to check
Printer’s output.
9.
OPERATOR DISPLAY – Shows Printer’s status including menus and error messages.
10.
MEDIA THICKNESS ADJUSTMENT KNOB – Adjusts height of Printheads to
compensate for different
media thicknesses.
NOTE: A complete description of the functions and operation of the Printer Keys
can be found in Section 3 – Operating the ASTROJET 1000P.