Troubleshooting guide

SECTION 1
GETTING ACQUAINTED
2
Rear View
1.
Media Thickness Control Knob – Adjusts height of Printheads.
2.
Sheet Separator Locking Lever – Locks Separators in place after it is adjusted.
3.
Sheet Separator – Separates each piece of media as it is feed.
4.
USB Port – Connects Printer to your computer using your USB Port.
5.
Parallel Port – Connects Printer to Parallel Printer Port on your computer.
6.
Main Power Switch – Turns Printer ON and OFF.
7.
Main Power Fuse – Protects all electronic circuits in Printer.
8.
Power Receptacle – Power cord plugs in here.
9.
Motor Circuit Breaker – Protects Printer’s Motor from overload.